2014 ML350 bluetec DIY fuel filter change
Thread Starter
Newbie
Joined: Apr 2022
Posts: 1
Likes: 0
From: Toronto, ON
2014 ML350 Bluetec
2014 ML350 bluetec DIY fuel filter change
Hi y'all,
I'm trying to DIY this nasty fuel filter change for my ML for the first time. With the pdfs (dm me if you need those!) from WIS and a few YouTube videos, the instruction seems to be pretty clear. Have anyone done this before, and is there anything that I should be particularly careful about?
Also, do I need those thread lockers on the screws when re-installing everything back?
I'm trying to DIY this nasty fuel filter change for my ML for the first time. With the pdfs (dm me if you need those!) from WIS and a few YouTube videos, the instruction seems to be pretty clear. Have anyone done this before, and is there anything that I should be particularly careful about?
Also, do I need those thread lockers on the screws when re-installing everything back?
Senior Member
Joined: Jul 2017
Posts: 487
Likes: 114
From: DFW, TX
Ml350 bluetec
Pretty straight forward and yes make sure you get the correct fuel filter. New clamps are required, I purchase the MB style clamps and special clamp plier. However I did not "prime" the pump and it started just fine.
