LCA bushing
#2
Senior Member
Likely a hydraulic press, and there may be a pin to remove too. But i wouldnt remove and replace just that if yours failed.
On almost any new MB its best to just replace the entire arm with a new one. I do see where the bushing is about $50 and the whole arm is about $200 ($850 for MB branded one).
You could take it to a shop (off the car) and have them press out and in the bushing, but that would likely cost the $150 different in the parts.
On almost any new MB its best to just replace the entire arm with a new one. I do see where the bushing is about $50 and the whole arm is about $200 ($850 for MB branded one).
You could take it to a shop (off the car) and have them press out and in the bushing, but that would likely cost the $150 different in the parts.
Last edited by MatthewJ; 01-17-2023 at 08:09 AM.