ML 350 BLUETEC - 2014 - 642826
Advice & help needed, Please.
I have a ML 350 BlUETEC, 2014 - W166 MODEL - 642826 ENGINE.
I just did a major service on the car:
PCV VALVE (ventilation crank case breather pipe & valve), turbo intake seal, metal charge pipe O-Ring seals, fuel filter, air filter, pollen filters, oil & oil filter with new sump plug & washer,
I used genuine Mercedes parts from the dealers,
every thing was fitted correctly & running perfect, until I floored the acceleration on the ML & I noticed oil dripping from the bottom of the engine on to the floor, I opened the bonnet & noticed oil sprayed all over the engine, Mainly on the right side (passenger),
I realised I made a silly error, by using the dip stick to measure the oil quantity, instead of adding 8.5 litres of engine oil, I put in 9.5 to 10 litres of oil.
Can any one help with This ?
Thanks In Advance.
Sorry for the late reply, Thank you very much for your reply, I only drove the car for15 minutes, so hopefully & fingers crossed.
Will let you know.
MANY THANKS.


