ls1_mast

as mentioned above , i bought the tactrix openport 2.0 from aliexpress and i have the xentry passthrue installed and working but when i connect them to my car w220 s55 2004 , i cant go thrue with most of the modules .
from what i gathered so far ( correct me if i'm wrong )
- my car has the ME-SFI 2.8 control unit
- w220 uses kline for many modules and NOT the can-bus ( is that true ? and what it means ?)
- passthrue works with newer models from 2006 and up ! ( although i found a youtube link that shows that it can work with ME2.8 but it doesnt show how !)

NOW my questions is:-
- can i use passthrue to full access my car ? and if not then what do i need ?
- can i use xentry openshell with VXDIAG VCX SE for Benz obd2 to full access my car modules or only C4 multiplexers works ?
any suggestions is appreciated
thanks

96_C280

Where you able to make it work with the W220??

ls1_mast

what do u mean by (where)

96_C280

Meant were.. jesus

JTAC

openport 2.0 is bad for kline mercedes.
vxdiag vcx se works with openshell and passthru version not problem. C4 only with openshell.

ls1_mast

that's great to know thanks for the help