Description:

A maniacal refurb.  (Therapy)

Red bores me.  But the lustre, the logo, and the attention to detail should set these apart.

The coating is wet-sprayed high temp single stage urethane with urethane clearcoat.  The custom logo is masked/painted and obviously sealed in.  The single stage caliper paint is laid right over fully blasted castings, so the bite is as good as it gets, and the surface is as slippery as there is. (read: easy to clean)  New stainless fasteners which should be easier to remove in time than the OEM counterparts.

Part numbers are below and data sheets on these units are listed in one of the images, but you should probably know what you're looking for to begin with.  These units (or variants of) were used on a number of Merc chassis over the years, so I’m leaving it in your (or your installer’s) capable hands to verify the fitment.  Pay attention to the rear caliper specs.  These are the units with the longer ears that have a narrower span than others that look identical apart from that feature.

Here's the tech ...

Front End:

• Casting #'s:  20.7919.00, 20791900, 19.7661.04, 19766104
• Centric #'s:   141.35124, 14135124, 141.35106, 14135106, 141.35146, 14135146
• Bracket #:     19.7661.04, 19766104

Rear End:

• Casting #'s:  20.8043.02, 20804303
• Centric #'s:   141.35564, 14135564

Mail me if interested, or shoot me a PM.  I'll throw them up on the Bay in a week or two if this stagnates.  So, if you're a nervous skeptic that wants the extra protection, you can sit on 'em, and peep Ebay in a bit.  I got the shipping if you buy 'em here.