Direct Dealer: Forgestar Wheels F14 CF5 CF5V CF10 CF7S F10D M14 D5 F14
PM, Email or Call me here at 818-821-1112 Sales@Motorsportsla.com
Forgestar CF10 Gloss Black
Just want to show the finishes because its hard to see the color from the website.
Bronze Burst
Golden Bronze
Forgestar CF10 Brushed Matte Antique Bronze
The Best of Mercedes & AMG
818-821-1112 Sales@Motorsportsla.com
Last edited by Motorsports LA; Apr 29, 2022 at 09:35 PM.
Authorized Dealer | PM, Email or Call for Forum Member Deals
+1(818)821-1112 | sales@motorsportsla.com
SNAP | AFFIRM | FINANCING AVAILABLE
Authorized Master Dealer | Feel free to message all questions
+1(818)821-1112 | sales@motorsportsla.com
SNAP | AFFIRM | FINANCING AVAILABLE
sales@motorsportsla.com +1(818)821-1112
SNAP - AFFIRM - FINANCING AVAILABLE
Authorized Master Dealer | PM, Email or Call for all inquires
+1(818)821-1112 | sales@motorsportsla.com
SNAP | AFFIRM | FINANCING AVAILABLE
Authorized Master Dealer | Feel free to message all inquires
+1(818)821-1112 | sales@motorsportsla.com
SNAP | AFFIRM | FINANCING AVAILABLE
+1(818)821-1112 | sales@motorsportsla.com
There are Mercedes center caps that closely watch. Can’t recall which years but I found some that are slightly larger and sanded down the edges roughly 0.1 inch to make them fit.
FRONT:
265/35ZR19
19x9.5 ET+30
REAR:
295/30ZR20
20x11 ET+45
Note that I did reshape (roll and pull) the rear fender. Also I am going to shim the rear coil springs and try to fit 305/30ZR20. Tires do occasionally scrub hitting a big dip or not slowing down enough for railroad tracks.
19 inch wheels on the back; the rolling diameter would be smaller than the front. The physics would be poor. Thus the reason why Mercedes uses 19/20 staggered setup.
Here is the part number for the shims:
Lower Seat 2053241800
.
There are Mercedes center caps that closely watch. Can’t recall which years but I found some that are slightly larger and sanded down the edges roughly 0.1 inch to make them fit.
FRONT:
265/35ZR19
19x9.5 ET+30
REAR:
295/30ZR20
20x11 ET+45
Note that I did reshape (roll and pull) the rear fender. Also I am going to shim the rear coil springs and try to fit 305/30ZR20. Tires do occasionally scrub hitting a big dip or not slowing down enough for railroad tracks.
19 inch wheels on the back; the rolling diameter would be smaller than the front. The physics would be poor. Thus the reason why Mercedes uses 19/20 staggered setup.
Here is the part number for the shims:
Lower Seat 2053241800
.
Authorized Master Dealer - sales@motorsportsla.com - (818) 821-1112


