02' ml500 shut off at stops
Thread Starter
Newbie
Joined: Nov 2012
Posts: 3
Likes: 0
2002 ml 500
02' ml500 shut off at stops
Owned a 2002 ml500, vehicle shutoff when comming to a stop, restart then repeat at the next stop. Change fuel filter before this problem, change crankshaft position sensor after this problem, nothing changed. NEED SOME ADVISE !!
MBWorld Fanatic!
Joined: Oct 2011
Posts: 7,107
Likes: 765
From: Bronx, N.Y.
2002 ML 320 & 2006 ML500
MBWorld Fanatic!
Joined: Oct 2011
Posts: 7,107
Likes: 765
From: Bronx, N.Y.
2002 ML 320 & 2006 ML500
Usually this problem is attributed to a faulty CKP (Crankshaft Position Sensor) which he already replaced. But he has not responded to your question of whether the CEL is on or not.
Regardless, a code (P0335) will be stored. Possibly he purchased a knock-off sensor which will be useless.
Regardless, a code (P0335) will be stored. Possibly he purchased a knock-off sensor which will be useless.
Last edited by Maj. Dundee; Nov 7, 2012 at 06:10 AM.
Thread Starter
Newbie
Joined: Nov 2012
Posts: 3
Likes: 0
2002 ml 500
Shutoff problems
Usually this problem is attributed to a faulty CKP (Crankshaft Position Sensor) which he already replaced. But he has not responded to your question of whether the CEL is on or not.
Regardless, a code (P0335) will be stored. Possibly he purchased a knock-off sensor which will be useless.
Regardless, a code (P0335) will be stored. Possibly he purchased a knock-off sensor which will be useless.
