560 SL Oil Level Sensor
#1
Member
Thread Starter
Join Date: Dec 2004
Location: Hawaii
Posts: 132
Likes: 0
Received 0 Likes
on
0 Posts
05 SLK 350, 97 S420, 92 Jeep, 04 Kia, 28 Ford Tudor, 51 Ford F3, 01 Harley, 03 Harley
560 SL Oil Level Sensor
My 89' 560 SL has a low level indicator on and the oil level is at full.
How difficult is this to repair/replace?
How difficult is this to repair/replace?
![hammer](https://mbworld.org/forums/images/smilies/bonk.gif)
#2
ohhh man..... did this light come on after a oil change?? im sorry.......
its a big job...... u can do it tho.... drop the sub frame and then drop the oil pan..... get a new sensor in there.... is it really worht it? just ground out the wire and be done w/ it
its a big job...... u can do it tho.... drop the sub frame and then drop the oil pan..... get a new sensor in there.... is it really worht it? just ground out the wire and be done w/ it
#3
Member
Thread Starter
Join Date: Dec 2004
Location: Hawaii
Posts: 132
Likes: 0
Received 0 Likes
on
0 Posts
05 SLK 350, 97 S420, 92 Jeep, 04 Kia, 28 Ford Tudor, 51 Ford F3, 01 Harley, 03 Harley
That is what I was afraid of.
I had the car setting for a while and after a couple of days of driving the light came on. Maybe it will clear up.
If not, I will disable that feature. Not worth dropping the pan in that car, too tight.
Appreciate your repsonse and advice.
I had the car setting for a while and after a couple of days of driving the light came on. Maybe it will clear up.
If not, I will disable that feature. Not worth dropping the pan in that car, too tight.
Appreciate your repsonse and advice.