Mercedes Tech Talk Discuss general technical questions and issues about your Mercedes-Benz. Moderated by a certified MB Tech.
Sponsored by:
Sponsored by:

AMG info needed.

Thread Tools
 
Search this Thread
 
Rate Thread
 
Old 10-17-2007 | 06:46 PM
  #1  
romeovictrbravo's Avatar
Thread Starter
Junior Member
 
Joined: Sep 2007
Posts: 16
Likes: 0
From: brisbane,Australia
mercs.lots of em!
AMG info needed.

I'm in the middle of a tuneup on a W126 500SEc with AMG engine mods.
The cams are marked ' AMG 5.0-1 ' with mercedes ID 08/09 ( left and right respectively) .In a stock engine these are timed at 22 or 20 ATDC.(lining up the notches against crank TDC) I'm trying to find out if the AMG cams are set up at a different centerline.It has had off set keys fitted,but i've replaced the chain etc and can find no reason for the key off set.
Any info on these cams at all would be most helpful. Cheers!

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 


You have already rated this thread Rating: Thread Rating: 0 votes,  average.

Quick Reply: AMG info needed.



All times are GMT -4. The time now is 03:42 AM.