bumpnzx3

I have the air intake tubes removed as well as the underbody pan and fan. Naturally I can't use a ratchet to get the crank pulley bolt loose. My air impact just barely fits in there with no socket on the end. If I put a socket on there- the back of the impact will hit the radiator. How in the world do you get it off? Surely the radiator doesn't have to come out?

I need to get the pulley off because I am taking it to a shop that has made pullies for me in the past. No one makes a UD crank pulley for this car- so I am going to have my own made.

redcoupe

You need the crank shaft pulley removal tool for the 271 engine.

part #271-589-00-40-00

reddog

Here's the link:

http://www.startekinfo.de/etools/con...2000%2040%2000

bumpnzx3

good deal- thanks for the tip.

micketlot

please contact me if you have i have a 2006 c230 and i need the intake/engine cover micketlot@yahoo.com