1997 c-280 Transmission issue need help!
01-28-2009, 10:56 AM
#1
Newbie
Thread Starter
Join Date: Jan 2009
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
1997 c-280
1997 c-280 Transmission issue need help!
Hi just wondering if any one has had this same problem with them, all gears are good other than 2nd going in to 3rd hits really hard unless i'm easy on the gas, also i want to change the fluid can any one tell me where the dip is for it thanks alot in advance....
Last edited by ejescalade; 01-28-2009 at 10:58 AM.
02-24-2009, 08:26 PM
#2
Senior Member
Join Date: Jun 2006
Location: Northern California
Posts: 303
Likes: 0
Received 1 Like
on
1 Post
It changes all the time
IIRC MB put the 722.6 in all the units after 1996 which means " YOU'RE SCREWED". A trans fluid change might help, but be sure to use the MB factory fluid. If you try using fluid from Cheapo-Mart, you can kiss that tranny good bye.
Good luck
Good luck
03-02-2009, 07:06 PM
#3
Member
Join Date: Nov 2008
Location: San Francisco, California
Posts: 76
Likes: 0
Received 1 Like
on
1 Post
1993 190E 2.6
Yeah sounds like you used el cheapo fluid. Get the proper ATF fluid that Benz specifies. I had some friends with your model year that had trouble with his brakes. Turns out cheap **** got DOT 3 fluid from Kragens instead of the DOT 4 fluid specified by MBZ and his hard driving is cooking his brake fluids. Buy cheap buy twice.
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
