12V power tap for Mobridge IPOD
#1
12V power tap for Mobridge IPOD
I'm in the middle of installing my Mobridge Ipod integration kit into my USA spec 2006 SL65 AMG and I have everything wired correctly except I need to tap into a 12V power source. I was wondering if the CD changer that I removed was running on 12V power and if so, which wire I should tap into.
This is the connector that I removed from the CD changer, could I tap into any of these for a 12V and a ground?
![](http://i106.photobucket.com/albums/m241/danoots/IMG_1294.jpg)
Here is the 12V and ground I'm tapping in just to clarify
![](http://i106.photobucket.com/albums/m241/danoots/IMG_1286.jpg)
Thank you very much for any help you can provide.
This is the connector that I removed from the CD changer, could I tap into any of these for a 12V and a ground?
![](http://i106.photobucket.com/albums/m241/danoots/IMG_1294.jpg)
Here is the 12V and ground I'm tapping in just to clarify
![](http://i106.photobucket.com/albums/m241/danoots/IMG_1286.jpg)
Thank you very much for any help you can provide.