Do Tele Aid modules require reflash?/MCA no sound issue
Thread Starter
Member
Joined: Aug 2003
Posts: 239
Likes: 0
From: Overhere
w210 e55
Do Tele Aid modules require reflash?/MCA no sound issue
I've been trying to figure out my no sound issue in my 03Ml 350. Someone suggested to get my Tele Aid module reflashed as it is a common issue resulting from the control unit going into by pass mode. Does this make sense?
Thread Starter
Member
Joined: Aug 2003
Posts: 239
Likes: 0
From: Overhere
w210 e55
Thanks, I am aware of the upgrade.
But, I don't use teleaid, never have and don't have a phone in the vehicle. I don't need or want tele aid.
My problem stems from a no sound from the MCS. It says no cd player found. The changer is in the d2b loop and powers fine. The svs message reads tele aid service required.
I have read malfunctions may be caused when the teleaid control unit enters by pass mode and the d2b transfer is interrupted creating this issue.
Does this sound right?
But, I don't use teleaid, never have and don't have a phone in the vehicle. I don't need or want tele aid.
My problem stems from a no sound from the MCS. It says no cd player found. The changer is in the d2b loop and powers fine. The svs message reads tele aid service required.
I have read malfunctions may be caused when the teleaid control unit enters by pass mode and the d2b transfer is interrupted creating this issue.
Does this sound right?
