P0715 Code - Changed the Conductor Plate

Jan 30, 2011 | 09:36 AM

Cycopath

Thread Starter

Junior Member

Joined: Dec 2010

Posts: 23

Likes: 0

2003 CLK55 AMG

P0715 Code - Changed the Conductor Plate

So after researching many threads, I figured I needed a new conductor plate when I was getting the P0715 code (Input/Turbine Speed Sensor Circuit Malfunction). I got done installing this last night and the car seems to be having the issues. I can shift out of park, but the transmission is not engaging. Disconnected the battery for a bit to reset the codes and when it came back on after letting the engine idle for a bit, the P0715 came back on.

Could one of the sensors really be bad and not the conductor plate? Seemed to me that the plate usually solved this error. Any ideas on what to do next?

TIA
Brian

Jan 30, 2011 | 07:07 PM

j21importer

Member

Joined: Sep 2010

Posts: 146

Likes: 1

From: IL

07 E63, 04 discovery

Is it possible that you have not put enough trans fluid in after the repair? Also is the data plug connector locked in?

Jan 30, 2011 | 07:09 PM

j21importer

Member

Joined: Sep 2010

Posts: 146

Likes: 1

From: IL

07 E63, 04 discovery

Oh yeah, forgot to mention that the speed sensor is located in the conductor plate.

Jan 31, 2011 | 05:36 PM

Cycopath

Thread Starter

Junior Member

Joined: Dec 2010

Posts: 23

Likes: 0

2003 CLK55 AMG

Got it all taken care of. had to get the computer reset to clear the code

Feb 2, 2011 | 06:04 PM

Cycopath

Thread Starter

Junior Member

Joined: Dec 2010

Posts: 23

Likes: 0

2003 CLK55 AMG

So after about 10 miles of driving I started to get the original symptoms with the CEL. Called my indie and he thinks its the torque converter. Any thoughts?

Reply Subscribe