Mercedes Tech Talk Discuss general technical questions and issues about your Mercedes-Benz. Moderated by a certified MB Tech.
Sponsored by:
Sponsored by:

NEED SOME QUICK ADVISE!!! Stuck door panel.....

Thread Tools
 
Search this Thread
 
Rate Thread
 
Old 05-06-2003 | 07:49 PM
  #1  
94E420's Avatar
Thread Starter
Member
 
Joined: Apr 2003
Posts: 89
Likes: 1
From: California
2006 SL500
NEED SOME QUICK ADVISE!!! Stuck door panel.....

I'm trying to remove my left rear door panel ON 1994 E420 to fix the window but can't get the panel off. I have removed everything else but the panel won't budge. And yes, I'm pulling UP!! NEED SOME QUICK ADVISE!!
Old 05-08-2003 | 01:45 PM
  #2  
jimmydagreek's Avatar
MBWorld Fanatic!
 
Joined: Mar 2003
Posts: 5,544
Likes: 1
From: SFV, SoCal
'04 Silverado Z71 - sold all my Benzes and need another!
First of all make sure that you have removed all of the screws. Then, you need to pull out (straight back) on the bottom of the panel to release all of the clips and then up to remove it from the window rail. Some of the screws tend to be hidden on the door panel like one of the ones on my 1997 E420 is behind the little plastic SRS tab, that I never knew. Good luck...
Old 05-13-2003 | 09:59 AM
  #3  
bamberger_1's Avatar
MBWorld Fanatic!
 
Joined: Aug 2002
Posts: 1,005
Likes: 32
From: Germany
'00 S320 W220, '98 A160 W168/ sold in 2005 '86 260 E W124 '90 260E W124
Is your car a W124 or already a W210 model?
Old 05-13-2003 | 11:16 AM
  #4  
jimmydagreek's Avatar
MBWorld Fanatic!
 
Joined: Mar 2003
Posts: 5,544
Likes: 1
From: SFV, SoCal
'04 Silverado Z71 - sold all my Benzes and need another!
Originally posted by bamberger_1
Is your car a W124 or already a W210 model?
1997 E420 is a W210 model. As far as I can remember the panels should remove the same way just look for the screws in different places.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 


You have already rated this thread Rating: Thread Rating: 0 votes,  average.

Quick Reply: NEED SOME QUICK ADVISE!!! Stuck door panel.....



All times are GMT -4. The time now is 08:26 PM.