MAF Reads 0 ONLY at idle!!
#1
Junior Member
Thread Starter
Join Date: Jun 2011
Posts: 15
Likes: 0
Received 0 Likes
on
0 Posts
w209 M271 engine 1.8L petrol european 2004
MAF Reads 0 ONLY at idle!!
Hello,
is it normal that the maf is reading zero only at idle, and figure updates while accelerating, but goes to zero again in P or N? its new maf (and several have been changed in last month) and all do the same!! and if i turn of the car and turn it on again (when in operating temp) rpm fluctuate a bit then settles, and the P0102 comes every now and then!!
any help apprecaited
is it normal that the maf is reading zero only at idle, and figure updates while accelerating, but goes to zero again in P or N? its new maf (and several have been changed in last month) and all do the same!! and if i turn of the car and turn it on again (when in operating temp) rpm fluctuate a bit then settles, and the P0102 comes every now and then!!
any help apprecaited