TeleAid Malfunction Msg for Non Subscribers
08-09-2003, 05:33 PM
#1
Super Moderator
Thread Starter
TeleAid Malfunction Msg for Non Subscribers
This has been talked about a lot on several forums. Here is the Update. This is straight from the Teleaid/MBUSA Telemetric people:
Question: If the customer declines service how do we remove the "1 Malfunction" message from the IP?
Answer: The "1 Malfunction" message will always remain on the IP if the customer declines the service. Legally it must appear as an indication to the customer that the service is not activated. If you scroll down that menu, you can see it says, "Tele Aid Not Activated" if you need to clarify the malfunction message for your customer.
Question: If the customer declines service how do we remove the "1 Malfunction" message from the IP?
Answer: The "1 Malfunction" message will always remain on the IP if the customer declines the service. Legally it must appear as an indication to the customer that the service is not activated. If you scroll down that menu, you can see it says, "Tele Aid Not Activated" if you need to clarify the malfunction message for your customer.
08-09-2003, 10:42 PM
#3
Super Moderator
Thread Starter
Originally posted by dtkw
TeleAids is something you have to pay after the first year, right? Same thing like the On Star, isn't it?
TeleAids is something you have to pay after the first year, right? Same thing like the On Star, isn't it?
08-11-2003, 10:15 AM
#4
Senior Member
Join Date: Jan 2002
Posts: 347
Likes: 0
Received 0 Likes
on
0 Posts
Not a Benzer anymore
I Don't Subscribe to TeleAid
2002 E-320 with the Instrument Panel Display (No Command):
I had the service department remove that message. I have no malfunction messages.
I had the service department remove that message. I have no malfunction messages.
08-11-2003, 11:55 AM
#5
Super Moderator
Thread Starter
I bet a lot of folks here would love to know the secret to doing that. Any way you can get the STAR DAS flowchart to tunr it off ?
