2008 c300 drivers seat not moving forward
#1
2008 c300 drivers seat not moving forward
My car seat stopped moving forward. It goes back fine, but when I try to move it forward, it just makes a click sound and doesn't do anything. After pressing it a few times forward, the clicking goes away as well. Can this be a fuse? I don't want to pay so much just for a simple fix. There's nothing blocking the way. Please help. If its the fuse, the diagram says 30amp fuse but 3 different locations. Which one would I change?
Rani
Rani
#3
Member
Join Date: Sep 2013
Location: lebanon
Posts: 97
Likes: 0
Received 0 Likes
on
0 Posts
mazda mx5
If its clicking then its notna fuse prob as power is getting to the actuator ... it stops clicking when it gets too hot after several attempts ....
Best thing to do is to take alook under the seat and see whats going on , might be smthg stuck on the rail and jamming the seat or it might be a bad actuator
Best thing to do is to take alook under the seat and see whats going on , might be smthg stuck on the rail and jamming the seat or it might be a bad actuator