SD Connect4 and WLAN issue.
#1
Newbie
Thread Starter
Join Date: Jun 2010
Posts: 9
Likes: 0
Received 0 Likes
on
0 Posts
W210 E-class (E200 CDI)
![Cool](https://mbworld.org/forums/images/icons/icon6.gif)
Hi.
I've just replaced the WLAN card in my SD Connect 4. I suspected th old was broken, but npw I'm not so sure anymore.
To be on the safe side, I bought the exact same card that was installed (Netgear WG511)
But by inserting the card, there is no indication that it has power, there is 2 led's that should light up, but they are both dark.
By pressing the "i" button on the MUX, it shows no MAC for the card. Is the card reader faulty, or must the MAC be registered somehow?
If so, how do I do this registration?
I've just replaced the WLAN card in my SD Connect 4. I suspected th old was broken, but npw I'm not so sure anymore.
To be on the safe side, I bought the exact same card that was installed (Netgear WG511)
But by inserting the card, there is no indication that it has power, there is 2 led's that should light up, but they are both dark.
By pressing the "i" button on the MUX, it shows no MAC for the card. Is the card reader faulty, or must the MAC be registered somehow?
If so, how do I do this registration?