STAR Xentry C4 convert to C3 help!
#1
STAR Xentry C4 convert to C3 help!
Hi Guys
Can someone point me in the right direction changing New 2015 C4 software back to C3? I have been searching for days without much luck
Cheers!
Can someone point me in the right direction changing New 2015 C4 software back to C3? I have been searching for days without much luck
Cheers!
#2
Out Of Control!!
Wow you are lost----what version of DAS Xentry are you fooling with and are you saying DAS Xentry is set up for a C4 mux and you want to use a C3 mux with the new system--yes or no?
#3
Mate im not fooling with anything, I purchased a new HDD preloaded with STAR however the supplier send a HDD setup for a C4 not a C3 like I already have, I am trying to confirm the settings for a C3. Since there are a couple of downloadable "fixes" to reset the program from C3 to C4 I would imagine somewhere out there is something to do the reverse?!
#4
Out Of Control!!
If your supplier will not send a C3 bin file,which would include the C3 blacklist patch, then all you can do is search for the .bin file and look for the cal.ini file--then edit the file and look for the line that indicates PART T that equals the C4 mux change the PART T to a PART D2 that equals the C3 mux.
Also the reason I asked for the version AH is that as of ver 09_2015 the HHT is no longer supported---your foooked for older cars!!
Also the reason I asked for the version AH is that as of ver 09_2015 the HHT is no longer supported---your foooked for older cars!!