Having the worst time getting reman coil pack back in my 2008 CL600 v12 TT!! Help!
Thread Starter
Newbie
Joined: Mar 2018
Posts: 1
Likes: 0
2008 CL600 V12 TT
Having the worst time getting reman coil pack back in my 2008 CL600 v12 TT!! Help!
I removed a failed driver side coil pack, using a reman from v12icpack.com, replaced all the spark plugs and little red insulators.. the coil pack was a son of a gun to get out, especially in that back area by the firewall!! That last plug gave me hell too. Ughh!
Now I can't seem to get the darn coil pack back IN!! I've wiggled, I've pushed, I've tapped with a rubber mallet, I've cursed it out, tried to reverse pry it back in (with little to no leverage)... I am at wits end here. I am literally like an inch away from being able to at least get a bolt in so I can force it that way.
Looking for ANY SUGGESTIONS.. my sanity is at risk lolol Thanks ahead of time!
Now I can't seem to get the darn coil pack back IN!! I've wiggled, I've pushed, I've tapped with a rubber mallet, I've cursed it out, tried to reverse pry it back in (with little to no leverage)... I am at wits end here. I am literally like an inch away from being able to at least get a bolt in so I can force it that way.
Looking for ANY SUGGESTIONS.. my sanity is at risk lolol Thanks ahead of time!
