mwhohner05

Based upon the front passenger seat rocky on both sides (more pronounced on left side) seat wobble, dipping, rocking, rocks - based upon visual inspection it appears the TS Locking Bearing Bolts (2 of them) require replacement due to alot of play for up and down - based upon "Washer" broken or worn down. The play for rocking and wobble is about 1/8 to 1/4 inches that is felt when driving with sudden stops and accelerations.

I purchased the kit for replacing the "bushings" in the front seat with the KIT from Mercedes-Benz A 012 820 75 10 TS Locking Bearing Kit - that for some reason includes 2 small white tubes from FUCHs Europe RENOLIT .

When and why do I have 2 tube for lubricant in this kit to be used for the prep and replacement of the 2 bushing bolts/nuts and ect. ???

I have researched the internet - and found nothing about lubricant for the removal, prep, and install of this 2 bolts/bushing washers ect.

What is the purpose of these 2 small lubricant tubes (looks like a small tooth paste tube) ????

My car is a 2008 W211 E350 Gasoline sedan.






BUSHING on frame/rail of seat to replace is below at PART # 145 on upper left of diagram below.