DIY: How to do coding to disable Start/Stop ECO for dummies
#29
C6 with dts monaco 8.14
Hi, thnx for the gr8 post, I recently bought mb c6 wifi chinese clone with a SSD which came with xentry 2023.6 and dts monaco 8.14, and some other softwares, is that enough to start? Anyway im going to do this next weekend hope I manage doing it write coz this eco start/stops drives me crazy on w222 2018, sometimes makes the car run in a strange way like being weak. I also want to deactivate sos msg if you have any idea about it but this post will be my start point
#30
Senior Member
I push the button to disable. The green light goes off. Or switch to Sport+ mode. Works well for me.
#31
I cannot. I am a newbie to all this MB coding. Took me a month reading forums and experimenting with my car. All because start/stop drove me nuts. Otherwise I am quite lazy
Last edited by mbw2020; 10-03-2023 at 08:44 PM.
The following users liked this post:
Jeeg1975 (12-22-2023)
#32
Hi, thnx for the gr8 post, I recently bought mb c6 wifi chinese clone with a SSD which came with xentry 2023.6 and dts monaco 8.14, and some other softwares, is that enough to start? Anyway im going to do this next weekend hope I manage doing it write coz this eco start/stops drives me crazy on w222 2018, sometimes makes the car run in a strange way like being weak. I also want to deactivate sos msg if you have any idea about it but this post will be my start point
#33
Hi all,finally someone who has found the time and desire to explain step by step how to navigate the graphs and screens of these software... congratulations, truly exhaustive and for starters you can understand the operating logic. Now wanting to advance a little, how is it possible to activate the AMG menu on a 2013 GLK 220 with Vediamo or DTS Monaco? obviously without causing any damage eheheh thanks for your availability
#34
Hi all,finally someone who has found the time and desire to explain step by step how to navigate the graphs and screens of these software... congratulations, truly exhaustive and for starters you can understand the operating logic. Now wanting to advance a little, how is it possible to activate the AMG menu on a 2013 GLK 220 with Vediamo or DTS Monaco? obviously without causing any damage eheheh thanks for your availability
The following users liked this post:
piermario (10-07-2023)
#35
Thanks, I know Amazing Road and I have followed several of his videos apart from the linguistic difference but in the end, since I have little knowledge of these software, I preferred not to risk this time and now I have AMG activated and 50 euros less on my account (via MBtools). However, the interest in learning about coding remains and in the future maybe I will be more sure about how/what to do. Thanks for your interest
#36
Good morning, another small question... so I'm trying to deactivate eco start-stop and in my case I found a difference in the variant coding panel. In my CR42 Ecu I don't find the Last Mode instruction but simply DefaultOFF and DefaultOn respectively in the first and second line. Is this normal or am I doing something wrong??
Thanks in advance
Thanks in advance
#37
Good morning, another small question... so I'm trying to deactivate eco start-stop and in my case I found a difference in the variant coding panel. In my CR42 Ecu I don't find the Last Mode instruction but simply DefaultOFF and DefaultOn respectively in the first and second line. Is this normal or am I doing something wrong??
Thanks in advance
Thanks in advance
#39
MBWorld Fanatic!
The following 2 users liked this post by JCM_MB:
CaliBenzDriver (10-14-2023),
piermario (10-14-2023)
#40
Last edited by piermario; 10-14-2023 at 02:36 PM.
#41
Hi, I managed to do some changes through dts monaco on w222 2018 s560, IC temp from F to C, remove seat belt warning, remove speed warning, radia range from USA to ECE but I am stuck on how to remove SOS error, check in HU55+IC222 but no luck, anyone knows how to make sos inoperative go away? I just want to make it (not equipped or not available). I went through MED40 as well but couldn't find it. using mb c6. remote connection help will be appreciated.
#43
Senior Member
@mbw2020 , @realeric Great info on variant coding in this thread!
Do either of you know if I can use DT Monaco to set SCN coding for a module to its OEM configuration?
I'm working on a 2018 S560 coupe (217) and need to re-code the left headlamp controller to see if it will address some reported faults.
Thanks.
Do either of you know if I can use DT Monaco to set SCN coding for a module to its OEM configuration?
I'm working on a 2018 S560 coupe (217) and need to re-code the left headlamp controller to see if it will address some reported faults.
Thanks.
#45
Senior Member
Can anyone share their copy of the DLLs?
A Google search these days leads you to vendors selling it and private forums with all kinds of restrictions on downloads for new users and/or join fees. The internet ain't what it used to be.
A Google search these days leads you to vendors selling it and private forums with all kinds of restrictions on downloads for new users and/or join fees. The internet ain't what it used to be.
#46
The dlls you are asking for cannot be easily shared. For obvious reasons. It took me 3 weeks or so to find everything needed. I did not keep track of what I found and where.
#47
I spent half the day trying to find & install all this software madness. all references are hidden behind a bunch of pay-forums. This "just google it" stuff doesn't work any more.
Also I realized it's probably smart to do this all on an old beater laptop that you'll never connect to the internet, plenty of stuff has trojans slipped in that windows defender spotted, and maybe some more that defender did NOT spot.
#48
This is a follow up to my previous post in this thread (#20). This time on how to remember last drive mode, e.g. Comfort vs Sport vs Sport+. The steps are 90% the same as the original post so make sure to read it first.
1. When creating a temporary workspace in DTS Monaco use EZS213.smr-d and ESP167.smr-d files.
2. Go to Quick Test, click Start button (near tab's top left corner). Not sure if it is really needed but I
always did it.
3. Next, we need to disable car's firewall. Otherwise variant coding will error out.
4. Go to Diagnostics Services tab. We'll be sending command to car by pressing Transmit button. Watch for
errors in result, at the bottom of the tab. If you get one then you are doing something wrong. Stop.
5. Double click on EZS213 [UDS_CAN_D]. It should change from orange to green.
6. Select EZS213 [UDS_CAN_D] > Session > [10] Extended Start. Press Transmit button (located below the
box where you selected Extended Start).
7. Select EZS213 [UDS_CAN_D]> General Jobs > Security Access Level 3B. Transmit. If no errors, car's
firewall is disabled!
8. EZS213 [UDS_CAN_D] should stay green to the very end, otherwise firewall will be back.
9. Next, we need to enable variant coding. Double click on ESP167[UDS_CAN_D]. It should turn green.
10. Select ESP167 [UDS_CAN_D] > Security Access > [27 08] Request Seed Variant Coding. Transmit. You
should get 8-byte seed value, e.g. B8,28,01,23,42,50,3B,70.
11. Open cmd, run mbseedkey_cli.exe -d C:\MBSeedKey\dlls\CPC_NG_CPC_NG_14_31_11.dll -a 0B -s
B828012342503B70. Copy generated value, e.g. 9F CB EB F6.
12. Back to Monaco. Select ESP167 [UDS_CAN_D] > Security Access > [27 0C] Send Key Variant Coding,
paste the seed key into Seed Key parameter. Transmit. Make sure no errors reported. If no errors, then
variant coding is enabled!
13. Go to Varian Coding tab.
14. Connect to ESP167 [UDS_CAN_D], select [002] MB-Funktionen (Fahrprogramm-Master) Write.
15. SAVE CURRENT DATA!!!
16. Find "LastMode_V2_0" line (byte 60, offset 6). Current value is likely to be "do_not_store". Change it to "store_infinity". Press Do Coding
button. Watch for errors.
17. Back to Diagnostics Services tab.
27. Select ESP167 > Ecu Reset -> [11 01] HardReset Reset. Transmit.
Done!
1. When creating a temporary workspace in DTS Monaco use EZS213.smr-d and ESP167.smr-d files.
2. Go to Quick Test, click Start button (near tab's top left corner). Not sure if it is really needed but I
always did it.
3. Next, we need to disable car's firewall. Otherwise variant coding will error out.
4. Go to Diagnostics Services tab. We'll be sending command to car by pressing Transmit button. Watch for
errors in result, at the bottom of the tab. If you get one then you are doing something wrong. Stop.
5. Double click on EZS213 [UDS_CAN_D]. It should change from orange to green.
6. Select EZS213 [UDS_CAN_D] > Session > [10] Extended Start. Press Transmit button (located below the
box where you selected Extended Start).
7. Select EZS213 [UDS_CAN_D]> General Jobs > Security Access Level 3B. Transmit. If no errors, car's
firewall is disabled!
8. EZS213 [UDS_CAN_D] should stay green to the very end, otherwise firewall will be back.
9. Next, we need to enable variant coding. Double click on ESP167[UDS_CAN_D]. It should turn green.
10. Select ESP167 [UDS_CAN_D] > Security Access > [27 08] Request Seed Variant Coding. Transmit. You
should get 8-byte seed value, e.g. B8,28,01,23,42,50,3B,70.
11. Open cmd, run mbseedkey_cli.exe -d C:\MBSeedKey\dlls\CPC_NG_CPC_NG_14_31_11.dll -a 0B -s
B828012342503B70. Copy generated value, e.g. 9F CB EB F6.
12. Back to Monaco. Select ESP167 [UDS_CAN_D] > Security Access > [27 0C] Send Key Variant Coding,
paste the seed key into Seed Key parameter. Transmit. Make sure no errors reported. If no errors, then
variant coding is enabled!
13. Go to Varian Coding tab.
14. Connect to ESP167 [UDS_CAN_D], select [002] MB-Funktionen (Fahrprogramm-Master) Write.
15. SAVE CURRENT DATA!!!
16. Find "LastMode_V2_0" line (byte 60, offset 6). Current value is likely to be "do_not_store". Change it to "store_infinity". Press Do Coding
button. Watch for errors.
17. Back to Diagnostics Services tab.
27. Select ESP167 > Ecu Reset -> [11 01] HardReset Reset. Transmit.
Done!
The following 2 users liked this post by mbw2020:
CaliBenzDriver (09-26-2024),
trigital (09-28-2024)
#50