Introducing SuperSprint's ML63AMG modular full exhaust system!
01-13-2012, 12:26 AM
#1
Former Vendor of MBWorld
Thread Starter
Introducing SuperSprint's ML63AMG modular full exhaust system!
CampioniShop is SuperSprint's newly appointed distributor in North America for Porsche, MB AMG, Audi S/RS applications. We want these systems on cars ASAP and offer extremely aggressive pricing.
About Supersprint:
The engineers at Supersprint realize that for maximum performance, exhaust development must begin at the exhaust ports of the cylinder head. This is why Supersprint has the largest variety of racing header systems in the world today. Each header incorporates CNC laser cut port matched flanges. Primary tubes are mandrel bent using the latest CNC tube bending equipment. With special tooling Supersprint has been able to keep weld joints to a minimum for added reliability.
The fully appointed R&D department uses the latest in prototyping equipment along with the reliability and accuracy of a MAHA "all wheel drive" chassis dyno. With over 50 years in performance exhaust development they have earned the confidence of many of Europe's most respected tuners. Most units are 100% stainless steel.
Mandrel bent
Full systems available
Dyno tested
CNC machined
304 stainless steel
Hand welded joints
Unlimited mileage warranty
Made in italy
The system is modular - all the parts can be fitted separately.
Equal length headers: 4368
Catless pipes L/R: 585
Centre muffler X pipe: 1233
OR
Centre race X pipe: 748
Rear sport mufflers 4x120x80mm: 2340
Sound clip:
http://www.youtube.com/watch?v=PQwKB...layer_embedded
Stock data:
Horsepower 477,9 Hp @ 6800 rpm
Torque 561,1 Nm @ 5320 rpm
Supersprint's full catted system:
- Manifold R.- L. 846801
- Front metallic kat R. 846802
- Front metallic kat L. 846822
- Centre exhaust + "X-Pipe" 846803
- Rear exhaust R. 846807
- Rear exhaust L. 846837
Horsepower 525,7 Hp @ 6780 rpm
Torque 614,9 Nm @ 4415 rpm
Bottom line: +47.8 hp with a full catted system w/o a tune!
About Supersprint:
The engineers at Supersprint realize that for maximum performance, exhaust development must begin at the exhaust ports of the cylinder head. This is why Supersprint has the largest variety of racing header systems in the world today. Each header incorporates CNC laser cut port matched flanges. Primary tubes are mandrel bent using the latest CNC tube bending equipment. With special tooling Supersprint has been able to keep weld joints to a minimum for added reliability.
The fully appointed R&D department uses the latest in prototyping equipment along with the reliability and accuracy of a MAHA "all wheel drive" chassis dyno. With over 50 years in performance exhaust development they have earned the confidence of many of Europe's most respected tuners. Most units are 100% stainless steel.
Mandrel bent
Full systems available
Dyno tested
CNC machined
304 stainless steel
Hand welded joints
Unlimited mileage warranty
Made in italy
The system is modular - all the parts can be fitted separately.
Equal length headers: 4368
Catless pipes L/R: 585
Centre muffler X pipe: 1233
OR
Centre race X pipe: 748
Rear sport mufflers 4x120x80mm: 2340
Sound clip:
http://www.youtube.com/watch?v=PQwKB...layer_embedded
Stock data:
Horsepower 477,9 Hp @ 6800 rpm
Torque 561,1 Nm @ 5320 rpm
Supersprint's full catted system:
- Manifold R.- L. 846801
- Front metallic kat R. 846802
- Front metallic kat L. 846822
- Centre exhaust + "X-Pipe" 846803
- Rear exhaust R. 846807
- Rear exhaust L. 846837
Horsepower 525,7 Hp @ 6780 rpm
Torque 614,9 Nm @ 4415 rpm
Bottom line: +47.8 hp with a full catted system w/o a tune!
Last edited by CampioniShop; 01-13-2012 at 01:48 AM.
