Mark this thread as Unsold
AZN Optics 5w5 194 ERROR FREE LEDs!
#52
SPONSOR/MBworld Guru
Thread Starter
All weekend orders have shipped out. Hopefully you guys will get it before Christmas!
#54
SPONSOR/MBworld Guru
Thread Starter
#55
SPONSOR/MBworld Guru
Thread Starter
Hope everyone had a good Christmas. All holiday and weekend orders have just been shipped out!
#56
SPONSOR/MBworld Guru
Thread Starter
All weekend orders have been shipped out.
5000K 194 LEDs are now out of stock, but my new shipment is scheduled to arrive Wed, so feel free to continue to place orders, but just expect your shipment to be delayed by a few days.
5000K 194 LEDs are now out of stock, but my new shipment is scheduled to arrive Wed, so feel free to continue to place orders, but just expect your shipment to be delayed by a few days.
#57
SPONSOR/MBworld Guru
Thread Starter
5000K now back in stock. Get your orders in!
Also my test festoon and turn signals, so will be conducting live testing. Thank you to those who volunteered to try them out.
Also my test festoon and turn signals, so will be conducting live testing. Thank you to those who volunteered to try them out.
#58
Member
Join Date: Dec 2008
Location: Breukelin, NY
Posts: 132
Likes: 0
Received 0 Likes
on
0 Posts
2009 GL450, 06 Triumph Speed Triple, 07 Triumph Speedmaster
Finally confirming that they do in fact fit X164s. They are a pain to get in but they do fit.
These are the 5000K bulbs. Top pic has HIDs on, bottom does not (the light you see in the lens is from the flash).
Last edited by Josey92; 01-20-2011 at 09:00 PM. Reason: Addt'l details
#60
SPONSOR/MBworld Guru
Thread Starter
#63
MBWorld Fanatic!
I received my LED city lights and they work like a charm. No more flickering. AZN thanks for including the instruction sheet advising not to push the LED bulbs all the way in -- I think that is how I killed my previous set. Great Seller!!
#65
SPONSOR/MBworld Guru
Thread Starter
Thanks for all your orders. 5000K LEDs are now sold out, but should be back in stock within the next couple weeks. You can still place your order for them, but shipping will be delayed. 8000K is still in stock and ready to ship
#66
SPONSOR/MBworld Guru
Thread Starter
New inventory arrived. All of you who backordered 5000K, your orders have now been shipped. Will be releasing new products and launching our website monday!
#67
Member
Join Date: Oct 2010
Location: West Covina, CA
Posts: 156
Received 0 Likes
on
0 Posts
W221 S600 // R230 SL500 // B8 A4 // JZZ30 SC300
Hey bro. Do you have any for an 03 SL500 for license plate and DRLs in white and that don't flicker or work like mine? Lol
#68
SPONSOR/MBworld Guru
Thread Starter
My 194 will work flicker free for your city/drl. Your plate lights should be festoon types, but need to know what the length is. I carry 36mm, 39mm, and 41mm.
#69
SPONSOR/MBworld Guru
Thread Starter
All weekend orders just shipped out. Thank you for your continual support.
#71
SPONSOR/MBworld Guru
Thread Starter
#73
SPONSOR/MBworld Guru
Thread Starter
As our Facebook subscribers already know, we've cut over our 194 Wedge LEDs to our new V3 design.
We're constantly exploring new technologies and techniques to present the best possible product out there for you. This new design utilizes a "box" top design will utilize a larger CREE diode and output slightly more lumen (brighter) and give better 360 degree lighting output. The big thing is we've introduced a new high temp resistant non-conductive gel substrate to the resistor component that has a much higher melting point than solder. This will help keep components in place during all but the largest of current surges which results in heat spikes. This is a problem with all aftermarket LEDs where these heat spikes reach the melting point of the solder which causes the resistors to "float" freely and allow gravity and engine/car vibration to cause component shifting. With this gel, everything is held in place until the current surge passes and the solder re-solidifies with everything held in place.
These have already undergone months of live testing from our volunteers and have met with success.
I'll get pictures posted later this week of the updated design.
We're constantly exploring new technologies and techniques to present the best possible product out there for you. This new design utilizes a "box" top design will utilize a larger CREE diode and output slightly more lumen (brighter) and give better 360 degree lighting output. The big thing is we've introduced a new high temp resistant non-conductive gel substrate to the resistor component that has a much higher melting point than solder. This will help keep components in place during all but the largest of current surges which results in heat spikes. This is a problem with all aftermarket LEDs where these heat spikes reach the melting point of the solder which causes the resistors to "float" freely and allow gravity and engine/car vibration to cause component shifting. With this gel, everything is held in place until the current surge passes and the solder re-solidifies with everything held in place.
These have already undergone months of live testing from our volunteers and have met with success.
I'll get pictures posted later this week of the updated design.
#75
SPONSOR/MBworld Guru
Thread Starter
AZN Optics be closed Thanksgiving Week (Nov 20th-24th). We will still process electronic orders, but shipping of order will be delayed till Monday Nov 26th.