LED reverse lamps
#1
Super Member
Thread Starter
LED reverse lamps
I saw a thread on it before, but was anyone successful in changing the rear reverse to the LED's without affecting the voltage? or has everyone just stuck with the incandescent?
#2
Junior Member
Join Date: Apr 2017
Location: England
Posts: 24
Received 0 Likes
on
0 Posts
Ml250 AMG BLUETEC
#3
Super Member
Thread Starter
#4
Junior Member
Join Date: Apr 2017
Location: England
Posts: 24
Received 0 Likes
on
0 Posts
Ml250 AMG BLUETEC
would these not do it they say error free in the title of them. http://www.ebay.co.uk/itm/2x-15SMD-T...wAAOSwf~ZZb00F
#5
Voltage has nothing to do with it!
it's load, or watts that the system looks for and produces an error if there's no load or less than expected load (bulb out) to put more load on it cheapest way is to parallel a resistor over the led. (aka warning canceller) less the resistance the bigger the load (0 ohm would be a short...)
Many bulbs out there that have this built in.
Both the ML and GLE are sub standard when it comes to reverse light output. save your money and save up for next car. no way any LED is going to fix it.
it's load, or watts that the system looks for and produces an error if there's no load or less than expected load (bulb out) to put more load on it cheapest way is to parallel a resistor over the led. (aka warning canceller) less the resistance the bigger the load (0 ohm would be a short...)
Many bulbs out there that have this built in.
Both the ML and GLE are sub standard when it comes to reverse light output. save your money and save up for next car. no way any LED is going to fix it.
Last edited by nookie; 07-31-2017 at 10:29 PM.
Trending Topics
#8
Super Member
Thread Starter
for the post above this:
the LED's make a HUGE difference when backing up, the only problem is when you wanna use the backup camera on the comand screen its too bright, when you back up at night time with the incandescent the display is good enough to back up at night time
#9
MBWorld Fanatic!
what would you recommend? Im looking to change the reverse lamps from incandescent to LED
for the post above this:
the LED's make a HUGE difference when backing up, the only problem is when you wanna use the backup camera on the comand screen its too bright, when you back up at night time with the incandescent the display is good enough to back up at night time
for the post above this:
the LED's make a HUGE difference when backing up, the only problem is when you wanna use the backup camera on the comand screen its too bright, when you back up at night time with the incandescent the display is good enough to back up at night time
#10
Junior Member
Join Date: Apr 2017
Location: England
Posts: 24
Received 0 Likes
on
0 Posts
Ml250 AMG BLUETEC
I'll ask my LED guy. He got me bulbs for my CL and we did everything on the car, it has no light out errors. We had to try 3 different ones for the city lights in the main headlight housing to find one that the car liked, same with the fog lights, but there is always one that works.
#11
MBWorld Fanatic!
Join Date: Jan 2007
Location: Alabama
Posts: 1,943
Received 214 Likes
on
169 Posts
2012 Volt - 2005 E55 - 2011 G55 - 2013 GL63
Got these for my GL and no codes thrown. Light output is great but the camera still is horrible with them so win and lose. Least no one can say they didn't know I was backing up.
#12
Super Member
Thread Starter
Got these for my GL and no codes thrown. Light output is great but the camera still is horrible with them so win and lose. Least no one can say they didn't know I was backing up.
https://www.amazon.com/gp/aw/d/B01LX...?ie=UTF8&psc=1
https://www.amazon.com/gp/aw/d/B01LX...?ie=UTF8&psc=1
#13
MBWorld Fanatic!
Join Date: Jan 2007
Location: Alabama
Posts: 1,943
Received 214 Likes
on
169 Posts
2012 Volt - 2005 E55 - 2011 G55 - 2013 GL63
These bulbs didn't throw an error.
Look from front seat, note there is a street light between those bushed behind the car.
Look from front seat with bulbs. Clearly brighter top/bottom on the bushes.
Still no help on the reverse cam, but need to check the setting to ensure brightness is turned up. Car in shop so will have to do later, as I wasn't aware of that setting in the gear icon.
Crappy night pic from the rear, very bright, so if anything least they know I'm backing up.
The following users liked this post:
drwolf (08-10-2017)
#14
Super Member
Thread Starter
Still no help on the reverse cam, but need to check the setting to ensure brightness is turned up. Car in shop so will have to do later, as I wasn't aware of that setting in the gear icon.
Crappy night pic from the rear, very bright, so if anything least they know I'm backing up.
it looks good from the back but i just wonder why it doesnt show on the SVC (Surround camera) when you shift into reverse, thats very odd
#15
MBWorld Fanatic!
Join Date: Jan 2007
Location: Alabama
Posts: 1,943
Received 214 Likes
on
169 Posts
2012 Volt - 2005 E55 - 2011 G55 - 2013 GL63
Agreed. When I get the car back from service I plan to play with it a bit more and see what I might can do to see better with the cam and LEDs working properly together. The cam sensor is surely small and needs all the light it can get I would assume but maybe too much is a bad thing.
#16
Super Member
Thread Starter
Agreed. When I get the car back from service I plan to play with it a bit more and see what I might can do to see better with the cam and LEDs working properly together. The cam sensor is surely small and needs all the light it can get I would assume but maybe too much is a bad thing.
#17
MBWorld Fanatic!
Join Date: Jan 2007
Location: Alabama
Posts: 1,943
Received 214 Likes
on
169 Posts
2012 Volt - 2005 E55 - 2011 G55 - 2013 GL63
Honestly I got the car home that night we bought it and swapped the LEDs right in. I know I looked at it but don't recall how it looked. Took car back to dealer next day to fix 2 issues I found and they have the car until end of next week I hope. Car is drivebale but said would take a week to get in shop as they were busy. I left it in case they get an early spot as we don't need the car at home right now. Once I get it back it will check the brightness settings on the screen and then swap back the bulbs to stock to get some good comparison pics. Swapping doesn't take long so no biggie.
Keep you all posted
Keep you all posted