2009 R 350 rear leveling
Thread Starter
Newbie
Joined: Nov 2018
Posts: 2
Likes: 0
2009 R 350, 1992 500SEL, 1984 LOTUS ESPRIT
2009 R 350 rear leveling
I am trying to bypass my rear leveling compressor. I do not have 4-wheel only rear leveling. I found the output tubing from the compressor but it goes into some block with two smaller hoses coming out. First what is that block, and secondly where do those two little tubes go.What hoses or tubing go to the back cylinders and where can I find that. If anyone has an air schematic I would surely appreciate it.
I I have cut the compressor output hose and with a push Union connected it to a tube that has a push Union Schrader valve. I then attempt to inflate via that and nothing happens. I have pulled the fuse and I tried to inflate with the car off.I don't know if that little block has a solenoid or a checking valve in it or what.
Thanks for any help
I I have cut the compressor output hose and with a push Union connected it to a tube that has a push Union Schrader valve. I then attempt to inflate via that and nothing happens. I have pulled the fuse and I tried to inflate with the car off.I don't know if that little block has a solenoid or a checking valve in it or what.
Thanks for any help
Last edited by Bill Koles; Nov 8, 2018 at 07:39 PM. Reason: Additional information
