Mark this thread as Unsold
fs corvette z06 1100 hp
Thread Starter
Newbie
Joined: Oct 2014
Posts: 6
Likes: 0
cl550
fs corvette z06 1100 hp
anyone would be interested in over 1100 whp corvette
here is some info Car is in good condition. I went through a lot to get to this point. I believe I have a very solid setup. Car was driven in nice days and weekends (obviously with only 7k miles). NEVER went to the drag stripe. Only highway pulls and Dyno pulls. Seriously the car wasn't abused. Yes I raced it but that's why it was built for. I was planning to take it to the track and that's why I put a roll bar in it but didn't have the chance and all the tracks around me are not open yet. Here is a list of modifications I have in this car. Feel free to ask questions and I will try to answer them to best of my knowledge.
I WILL START WITH 75K OBO
http://s1059.photobucket.com/user/99...tml?sort=3&o=0
2008 Corvette C6 Z06
*** Factory Options:
- 7500miles
- JSB
- Black/Red 2-Tone Seats
- HUD
- Nav System
- Heated Seats
*** Engine Modification
- LME/RED built 434ci LSX
- Callies Crank/Compstar Rods/Weisco Pistons
- Brodix LS7 6-Bolt Heads
- Dallas Performance 10-Rib F1X Procharger Kit w/ Direct Drive.
- Procharger Race Intercooler with Custom Piping
- IW 10% OD Balancer
- Dweitts Radiator
- RR Duel Fan w/ Fan Switch
- Snow Duel Methanol Kit w/ Rear Hatch Tank.
- LG Longtube Headers
- LG Cat-Back
- 2 Morosso catch can
- in fender coil relocation kit
- big red blow off valve
*** Drivetrain Modification
- RPM Stage 6 Built TR6060
- DSS Alum Driveshaft with Alum Couplers
- Brand New Centerforce DYAD Clutch
- ECS Diff Brace
- MGW Short Shifter
- C5 Axles
*** Fuel System Modification
- Full Return System (8an feed 6an return)
- Walbro 450 Intanke
- A&A External System w/ Bosch Pump
- Boost a Pump
- Denso 1600 Injectors
- Wilson Fuel Rails
- Aeromotive Fuel Pressure Regulator
*** Interior/Electronics
- proefi128 with datta logging screen brand new just installed over $ 5k
- RSD 5point Roll Bar
- 6point Harness (2012 Date) never use
- 2.5 Speed Density Tune
- lloyd skull floor mats
*** Exterior Modification
- weldracing Wheels 17'' front and back with new tires (Z06 specs)
- Painted Black Halo/Top
- Blacked Out Tail Lights and Side Markers
- Lowered
- 5% tint
I am sure I am forgetting some stuff but let me know if you have any questions. Car is located in Denver, CO. pm your number for pictures.
here is some info Car is in good condition. I went through a lot to get to this point. I believe I have a very solid setup. Car was driven in nice days and weekends (obviously with only 7k miles). NEVER went to the drag stripe. Only highway pulls and Dyno pulls. Seriously the car wasn't abused. Yes I raced it but that's why it was built for. I was planning to take it to the track and that's why I put a roll bar in it but didn't have the chance and all the tracks around me are not open yet. Here is a list of modifications I have in this car. Feel free to ask questions and I will try to answer them to best of my knowledge.
I WILL START WITH 75K OBO
http://s1059.photobucket.com/user/99...tml?sort=3&o=0
2008 Corvette C6 Z06
*** Factory Options:
- 7500miles
- JSB
- Black/Red 2-Tone Seats
- HUD
- Nav System
- Heated Seats
*** Engine Modification
- LME/RED built 434ci LSX
- Callies Crank/Compstar Rods/Weisco Pistons
- Brodix LS7 6-Bolt Heads
- Dallas Performance 10-Rib F1X Procharger Kit w/ Direct Drive.
- Procharger Race Intercooler with Custom Piping
- IW 10% OD Balancer
- Dweitts Radiator
- RR Duel Fan w/ Fan Switch
- Snow Duel Methanol Kit w/ Rear Hatch Tank.
- LG Longtube Headers
- LG Cat-Back
- 2 Morosso catch can
- in fender coil relocation kit
- big red blow off valve
*** Drivetrain Modification
- RPM Stage 6 Built TR6060
- DSS Alum Driveshaft with Alum Couplers
- Brand New Centerforce DYAD Clutch
- ECS Diff Brace
- MGW Short Shifter
- C5 Axles
*** Fuel System Modification
- Full Return System (8an feed 6an return)
- Walbro 450 Intanke
- A&A External System w/ Bosch Pump
- Boost a Pump
- Denso 1600 Injectors
- Wilson Fuel Rails
- Aeromotive Fuel Pressure Regulator
*** Interior/Electronics
- proefi128 with datta logging screen brand new just installed over $ 5k
- RSD 5point Roll Bar
- 6point Harness (2012 Date) never use
- 2.5 Speed Density Tune
- lloyd skull floor mats
*** Exterior Modification
- weldracing Wheels 17'' front and back with new tires (Z06 specs)
- Painted Black Halo/Top
- Blacked Out Tail Lights and Side Markers
- Lowered
- 5% tint
I am sure I am forgetting some stuff but let me know if you have any questions. Car is located in Denver, CO. pm your number for pictures.
