Mark this thread as Sold
W203 Part out
08-23-2009, 07:17 PM
#1
MBWorld Fanatic!
Thread Starter
Join Date: Sep 2005
Location: NJ
Posts: 5,769
Likes: 0
Received 0 Likes
on
0 Posts
'08 E550 4Matic
W203 Part out
--As of right now this is a teaser. Depending on the interest I receive I will choose whether or not to continue. --
Alright folks, I think its time for me to part out and move onto a new project.
Shipping available anywhere in the continental US, at buyers expense.
Local pickup is preferred!
Bi-Xenons
Bi-Xenon headlights
Price: $900
Will fit any 01-07 C-class sedan. Will NOT fit the coupe.
The shrouds have been painted 744 Silver. I can paint the shrouds any color you like at no additional cost, or I can put the old chrome shrouds in.
S-Class tail lights
S-Class tail lights
Price: $100
Will fit any 01-07 C-class sedan. Will NOT fit the coupe.
Tail lights have been tinted, and have 3 coats of clear coat.
Rieger Front Bumper
Rieger Front Bumper + Hella fog light kit + air splitter
Price: $600
Will fit any 01-07 C-class sedan. Will NOT fit the coupe.
Rieger Side Skirts
Rieger Side Skirts
Price: $350
Will fit any 01-07 C-class sedan with regular side skirts (not amg). Will NOT fit the coupe.
Rieger Rear Add On Lip
Rieger Rear Add On Lip
Price: $175
Will fit any 01-07 C-class sedan with non sport bumper
18x8 Sport edition ST4
18x8 Sport edition ST4 with 225/40-18 Kumho Ecsta ASX tires. Fronts are brand new, rears still have 50-60% tread left
Wheels have some rock chips and some paint chipping near the lugs.
Price: $700
C32 BBK
C32 Calipers and Akebono Euro ceramic pads. Rotors should be replace soon, so they will NOT be include.
Price: $400
Digital climate control
Digital climate control
Price: $100
Part number: 209 830 02 85
Trunk spoiler
Trunk spoiler
Price: $125
Brabus Illuminated Shift knob
Brabus Illuminated Shift knob
Price: $50
Sprint Booster
Sprint booster (automatic transmission)
Price: $200
74mm Throttle body
74mm Throttle body
Price: $200
W203 4matic lowering springs
Vogtland Springs SOLD
Price: $125
Used for 25-30k miles
H&R lowering springs (only available in Europe)
Price: $200
Used for less than 2k miles
Eisenmann exhaust
Eisenmann exhaust
Price: $400
Exhaust has been converted to quad setup. you can either take it like that or the original tips can be welded back on.
Alright folks, I think its time for me to part out and move onto a new project.
Shipping available anywhere in the continental US, at buyers expense.
Local pickup is preferred!
Bi-Xenons
Bi-Xenon headlights
Price: $900
Will fit any 01-07 C-class sedan. Will NOT fit the coupe.
The shrouds have been painted 744 Silver. I can paint the shrouds any color you like at no additional cost, or I can put the old chrome shrouds in.
S-Class tail lights
S-Class tail lights
Price: $100
Will fit any 01-07 C-class sedan. Will NOT fit the coupe.
Tail lights have been tinted, and have 3 coats of clear coat.
Rieger Front Bumper
Rieger Front Bumper + Hella fog light kit + air splitter
Price: $600
Will fit any 01-07 C-class sedan. Will NOT fit the coupe.
Rieger Side Skirts
Rieger Side Skirts
Price: $350
Will fit any 01-07 C-class sedan with regular side skirts (not amg). Will NOT fit the coupe.
Rieger Rear Add On Lip
Rieger Rear Add On Lip
Price: $175
Will fit any 01-07 C-class sedan with non sport bumper
18x8 Sport edition ST4
18x8 Sport edition ST4 with 225/40-18 Kumho Ecsta ASX tires. Fronts are brand new, rears still have 50-60% tread left
Wheels have some rock chips and some paint chipping near the lugs.
Price: $700
C32 BBK
C32 Calipers and Akebono Euro ceramic pads. Rotors should be replace soon, so they will NOT be include.
Price: $400
Digital climate control
Digital climate control
Price: $100
Part number: 209 830 02 85
Trunk spoiler
Trunk spoiler
Price: $125
Brabus Illuminated Shift knob
Brabus Illuminated Shift knob
Price: $50
Sprint Booster
Sprint booster (automatic transmission)
Price: $200
74mm Throttle body
74mm Throttle body
Price: $200
W203 4matic lowering springs
Vogtland Springs SOLD
Price: $125
Used for 25-30k miles
H&R lowering springs (only available in Europe)
Price: $200
Used for less than 2k miles
Eisenmann exhaust
Eisenmann exhaust
Price: $400
Exhaust has been converted to quad setup. you can either take it like that or the original tips can be welded back on.
Last edited by C24owner; 08-23-2009 at 11:22 PM.
08-23-2009, 07:41 PM
#2
Senior Member
Join Date: Jan 2009
Location: Helsinki, Finland
Posts: 354
Likes: 0
Received 0 Likes
on
0 Posts
2006 mercedes benz C180k Avantgarde SE
C32 BBK
Hi C24Owner,
are the calipers for front only or front + rear & are those bigger than my Avantgarde Sports Edition OEM calipers? Do you ship outside US (buyer will bare the shipping cost).
Thanks
Zack
are the calipers for front only or front + rear & are those bigger than my Avantgarde Sports Edition OEM calipers? Do you ship outside US (buyer will bare the shipping cost).
Thanks
Zack
08-23-2009, 08:19 PM
#5
Super Member
Join Date: Feb 2009
Location: San Francisco
Posts: 801
Likes: 0
Received 1 Like
on
1 Post
2009 SLK 55 AMG
Wow, I love the quad set-up you have going on.
Sad to see you parting out, as I absolutely loved your combination of Rieger, Lorinser, and quads.
By any chance, could you tell me how you did the quad?
What did you do about the spacing of the wheel well?
Did you just run a pipe from the left side to the right?
Where did you add the mounting brackets to hold the stuff on the right?
Does it sound weird that it's not a true quad? ie: Is the left side wayy louder than the right? Lol.
I'd love your sides / rieger if they were black!
And your wheels if I didn't say I'd save up for something more expensive.
Sad to see you parting out, as I absolutely loved your combination of Rieger, Lorinser, and quads.
By any chance, could you tell me how you did the quad?
What did you do about the spacing of the wheel well?
Did you just run a pipe from the left side to the right?
Where did you add the mounting brackets to hold the stuff on the right?
Does it sound weird that it's not a true quad? ie: Is the left side wayy louder than the right? Lol.
I'd love your sides / rieger if they were black!
And your wheels if I didn't say I'd save up for something more expensive.
08-23-2009, 08:31 PM
#6
MBWorld Fanatic!
Thread Starter
Join Date: Sep 2005
Location: NJ
Posts: 5,769
Likes: 0
Received 0 Likes
on
0 Posts
'08 E550 4Matic
jl?
No, sorry, this is for the m112 motor.
Wow, I love the quad set-up you have going on.
Sad to see you parting out, as I absolutely loved your combination of Rieger, Lorinser, and quads.
By any chance, could you tell me how you did the quad?
What did you do about the spacing of the wheel well?
Did you just run a pipe from the left side to the right?
Where did you add the mounting brackets to hold the stuff on the right?
Does it sound weird that it's not a true quad? ie: Is the left side wayy louder than the right? Lol.
I'd love your sides / rieger if they were black!
And your wheels if I didn't say I'd save up for something more expensive.
Sad to see you parting out, as I absolutely loved your combination of Rieger, Lorinser, and quads.
By any chance, could you tell me how you did the quad?
What did you do about the spacing of the wheel well?
Did you just run a pipe from the left side to the right?
Where did you add the mounting brackets to hold the stuff on the right?
Does it sound weird that it's not a true quad? ie: Is the left side wayy louder than the right? Lol.
I'd love your sides / rieger if they were black!
And your wheels if I didn't say I'd save up for something more expensive.
Sounds about the same, you really cant tell the difference.
http://www.youtube.com/watch?v=0kIDs5PbEZE
As for any of the body parts I can paint them for an addition cost.
08-23-2009, 09:53 PM
#7
MBWorld Fanatic!
Join Date: Jun 2006
Location: Long Island, NY
Posts: 2,140
Likes: 0
Received 0 Likes
on
0 Posts
C3Twon AWD Jumpofffff
Nick, i might be interested in the springs let me know on shipping to 11050... very tempting although i might move onto a new project also
which ones will lower my 4matic more H&R or Votlag? i can't spell i know
which ones will lower my 4matic more H&R or Votlag? i can't spell i know
Trending Topics
08-24-2009, 09:12 AM
#9
MBWorld Fanatic!
Thread Starter
Join Date: Sep 2005
Location: NJ
Posts: 5,769
Likes: 0
Received 0 Likes
on
0 Posts
'08 E550 4Matic
08-24-2009, 10:18 PM
#13
MBWorld Fanatic!
Join Date: Jun 2003
Location: nj
Posts: 4,705
Likes: 0
Received 2 Likes
on
2 Posts
a car that can't do the throttle reset.
How is the fitment of the front?
Is it gonna look stupid on my C32 with just the front?
Where in CT are you? Might be worth the drive for me.
Is it gonna look stupid on my C32 with just the front?
Where in CT are you? Might be worth the drive for me.
08-24-2009, 10:27 PM
#14
MBWorld Fanatic!
Thread Starter
Join Date: Sep 2005
Location: NJ
Posts: 5,769
Likes: 0
Received 0 Likes
on
0 Posts
'08 E550 4Matic
PM sent
I live on the NY border (Danbury) about a 2hr drive from Elizabeth, NJ.
It will look good without the side skirts.
It will look good without the side skirts.
08-24-2009, 11:07 PM
#17
MBWorld Fanatic!
Thread Starter
Join Date: Sep 2005
Location: NJ
Posts: 5,769
Likes: 0
Received 0 Likes
on
0 Posts
'08 E550 4Matic
Fitment is good.
Only 2 things wrong with it. There is a small chip near the passenger side fog light and a crack that was repaired underneath. The crack isn't visible because the air splitter covers it up.
http://i122.photobucket.com/albums/o...51/bumper1.jpg
Only 2 things wrong with it. There is a small chip near the passenger side fog light and a crack that was repaired underneath. The crack isn't visible because the air splitter covers it up.
http://i122.photobucket.com/albums/o...51/bumper1.jpg
08-26-2009, 10:59 AM
#20
MBWorld Fanatic!
Thread Starter
Join Date: Sep 2005
Location: NJ
Posts: 5,769
Likes: 0
Received 0 Likes
on
0 Posts
'08 E550 4Matic
Still for sale:
BIX
tail lights- pending
Front Bumper
Side skirts
Rear add on
Wheels
AMG Calipers
Trunk spoiler
H&R 4matic Springs
Eisenmann exhaust.
BIX
tail lights- pending
Front Bumper
Side skirts
Rear add on
Wheels
AMG Calipers
Trunk spoiler
H&R 4matic Springs
Eisenmann exhaust.
08-26-2009, 04:28 PM
#22
MBWorld Fanatic!
Thread Starter
Join Date: Sep 2005
Location: NJ
Posts: 5,769
Likes: 0
Received 0 Likes
on
0 Posts
'08 E550 4Matic
The shop that did the work cut off the original left tip and welded in a Y pipe with two tips, then cut off the right original tip and welded in a bent pipe to clear the spare tire well then added two more tips.
