Be careful to shrink the pulley
07-28-2002, 07:52 PM
#1
Super Member
Thread Starter
Join Date: Jun 2002
Location: Lean runner
Posts: 972
Likes: 0
Received 0 Likes
on
0 Posts
Be careful to shrink the pulley
One of my buddy shrink the diameter of pulley in C32Kraised over 0.7 bar, as I posted here for my concern.
Push over the stock setting do make this C32K very close to AMG, either in quarter mile or high speed cruise.
He "jogged" accompanied by C32AMG & CLK500, no way to
easy run his C32K or he'll be smoked badly.
As soon as he hit 162 mph, "check engine" lite-up and he get out of the way to let CLK500 overtook.
Plan go back to Kleemann Dept. immediately this morning here
Mercedes Taiwan supervised this tunning.
I'll post later to see how technician find out the cause.
08-01-2002, 06:36 AM
#2
Super Member
Thread Starter
Join Date: Jun 2002
Location: Lean runner
Posts: 972
Likes: 0
Received 0 Likes
on
0 Posts
Reset the computer, check engine LIGHT disappeared.The 0.7 bar(66 mm) is too aggressive, though nothing wrong so far (after reset),
my friend(C32K) change back the pulley to 70mm.
