sway bars..
#1
Member
Thread Starter
Join Date: Nov 2001
Location: Cleveland Ohio
Posts: 136
Likes: 0
Received 0 Likes
on
0 Posts
2000 Clk 430
sway bars..
Has anyone installed Eibach sway bars on a CLK 430? If so, how much less sway is there without doing other mods? Eibach sway bars are the same size as stock, so they must be stiffer.
Thanks
Thanks
#2
Out Of Control!!
Eibach sway bars are NOT the same size as stock. I installed them on my 430, and they perform much better. They are 6mm wider in the front (not sure in rear).
Front before 22, after 28
Eibach are red:
Front before 22, after 28
Eibach are red:
![](https://mbworld.org/upload/2001/Front%20Swaybars%20before22after28.jpg)
#3
Member
Thread Starter
Join Date: Nov 2001
Location: Cleveland Ohio
Posts: 136
Likes: 0
Received 0 Likes
on
0 Posts
2000 Clk 430
Mach430..
Thanks. A while back when I got my Eibach springs, I climbed under my car and miked my sway bars, I thought they were the same size. I guess the Eibach sway bars are next.
Found this on the web.
Front Bar Diameter: 28 mm.
Rear Bar Diameter: 18 mm.
Thanks. A while back when I got my Eibach springs, I climbed under my car and miked my sway bars, I thought they were the same size. I guess the Eibach sway bars are next.
Found this on the web.
Front Bar Diameter: 28 mm.
Rear Bar Diameter: 18 mm.
Last edited by Howard; 12-18-2001 at 06:27 AM.
#6
Out Of Control!!
Originally posted by 2PHAST
You may want to explore the possibilities of using the 500E sway bars, front is 28 mm rear is 18 mm. Hell of a lot cheaper than the Eibach kit.
You may want to explore the possibilities of using the 500E sway bars, front is 28 mm rear is 18 mm. Hell of a lot cheaper than the Eibach kit.