What's the best Pistons, Rods & Valves?
11-27-2008, 12:16 PM
#1
MBWorld Fanatic!
Thread Starter
Join Date: Dec 2005
Location: So Cal
Posts: 2,347
Likes: 0
Received 1 Like
on
1 Post
2006 Weistec 3.0L SC'd C55, 2006 MaxPsi PT6466 Turbo'd M3, 2019 Maserati GTS , 2020Alfa Quadrifoglio
What's the best Pistons, Rods & Valves?
I am considering the following and need any advice I can get...
Forged vs. Cast Pistons - Any major difference?
Best brand for MB? Manley or CP or other...
Titanium vs. 4340 Steel Connecting Rods - Differences? Titanium worth it?
Best brand for MB? Pauter, Manley or other
Titanium oversized 1mm Intake & Exhaust Valves - Worth it?
Best brand for MB? Ferrera or other
If there are any tuner/engine upgrade shops that can give me a quote, I am ready to start the project today.
I am also considering boring out my 5.5litre to a 6.1litre like Brabus does for C55s but the cost has too be much less than Brabus. This displacment increase must also be compatible with my Kleemann SC and two Garrett twin turbos. The drivetrain would also need to be upgraded to at least Maybach Guard Specs. Please PM me if you can do it complete with ECU/TCU tuning.
Forged vs. Cast Pistons - Any major difference?
Best brand for MB? Manley or CP or other...
Titanium vs. 4340 Steel Connecting Rods - Differences? Titanium worth it?
Best brand for MB? Pauter, Manley or other
Titanium oversized 1mm Intake & Exhaust Valves - Worth it?
Best brand for MB? Ferrera or other
If there are any tuner/engine upgrade shops that can give me a quote, I am ready to start the project today.
I am also considering boring out my 5.5litre to a 6.1litre like Brabus does for C55s but the cost has too be much less than Brabus. This displacment increase must also be compatible with my Kleemann SC and two Garrett twin turbos. The drivetrain would also need to be upgraded to at least Maybach Guard Specs. Please PM me if you can do it complete with ECU/TCU tuning.
