any update of the supersprint headers from Kleemann??
05-01-2003, 08:23 PM
#2
Former Vendor of MBWorld
Join Date: Nov 2001
Posts: 930
Likes: 0
Received 0 Likes
on
0 Posts
Yes-
We did the headers at the same time we did our lightweight flywheel. I had dyno time scheduled today but the shop had to cancel due to a drive failure in the PC attached to the dyno. Supposed to be fixed next week. If time permits I will go to Denver to use a shop there to get these numbers up. Sorry- for the delay.
We did the headers at the same time we did our lightweight flywheel. I had dyno time scheduled today but the shop had to cancel due to a drive failure in the PC attached to the dyno. Supposed to be fixed next week. If time permits I will go to Denver to use a shop there to get these numbers up. Sorry- for the delay.
05-17-2003, 03:08 AM
#3
Almost a Member!
Join Date: Feb 2003
Location: Orlando, FL
Posts: 52
Likes: 0
Received 0 Likes
on
0 Posts
Sorry, I'm new here and it seems I'm asking quite a few questions, but do you have a retail price on the flywheel and the header system? Thanks! The headers appear to be of T-304 construction? And lastly, is the flywheel TUV and SFI approved? Thanks!
05-17-2003, 02:16 PM
#5
MBWorld Fanatic!
If I remember correctly he wanted $1,800 for the flywheel on an exchange basis with your old one and it was about $1,000 for the headers with the 2 1/2" pipe back to the muffler and that sounds about right, I think Supersprint sells the headers by themselves for about $700. Prices go up with every additional pony. This is for the 2.3L motor though, won't work on the '03.
