M113 Fuel and Ignition map?
Thread Starter
Member
Joined: Feb 2017
Posts: 171
Likes: 13
From: Kansas
1999 SLK 5.5L 6-speed, 1993 300 SE
M113 Fuel and Ignition map?
Hello. I'm running megasquirt on an M113 V8 that I installed in my 1999 SLK230.
I'm curious if any fuel and ignition maps/tables have been generated for one of these V8's.
I've thought about contacting some of the big guys like Kleeman or RENNtech, but I don't want to be making a fool of myself, so I will try here first.
I basically want to get an idea of what ignition advance and fuel load goes into one of these engines from the factory. any advice on how to find this information would be greatly appreciated!
Thanks you!
I'm curious if any fuel and ignition maps/tables have been generated for one of these V8's.
I've thought about contacting some of the big guys like Kleeman or RENNtech, but I don't want to be making a fool of myself, so I will try here first.
I basically want to get an idea of what ignition advance and fuel load goes into one of these engines from the factory. any advice on how to find this information would be greatly appreciated!
Thanks you!
Thread Starter
Member
Joined: Feb 2017
Posts: 171
Likes: 13
From: Kansas
1999 SLK 5.5L 6-speed, 1993 300 SE
Those are very discrete questions that ant tuner worth his salt would know. Go back and ask Mr. Squirt. Additionally there are thousands of free maps available, you just have to get off the couch and do some work yourself---asking a question isn't foolish--RENNtech a big guy are you serious!
The tuning I have now is working well. Just wondered if there was anything better.
I know asking a question isn't foolish, but some peoples answers will make it seem so!
Last edited by loggato; Sep 14, 2017 at 09:26 AM.
Thread Starter
Member
Joined: Feb 2017
Posts: 171
Likes: 13
From: Kansas
1999 SLK 5.5L 6-speed, 1993 300 SE
Newbie
Joined: Jul 2019
Posts: 3
Likes: 0
Mercedes 190E 2.3-16, E36T clone
I’m actually pulling the C36 M104/6-speed out of my wagon to swap in an M113 and 6-speed. I’ve already got MS3 wired up and was hoping I could borrow your tune to get me started. I’m swapping in a W211 steering rack as well, what’d you use to adapt to the stock steering column? Thanks!
