OK - you're going for 1/4 mi times - what tire/slick setup?
#1
Member
Thread Starter
Join Date: Nov 2001
Location: Dallas
Posts: 116
Likes: 0
Received 0 Likes
on
0 Posts
CLK55
OK - you're going for 1/4 mi times - what tire/slick setup?
Just curious - since the CLK can only do 265 wide - what tire / rim combo for drag racing - just a track setup. 16s for more wrinkle on the side wall? Anyone research this?
shell
shell
#2
MBWorld Fanatic!
Both Nitto and BF Goodrich make DOT legal radial drag tires in 16" and 17" sizes. They hook very well and are acceptable for street driving. I've seen guys making 400rwhp run great 60' times at the track with these. When one of my cars was making approximately 385rwhp (118mph trap speed in the 1/4) I used 255/50 16 BFG Drag Radials.
If you're putting out serious HP, Mickey Thompson makes a 16" version of their ET Street (26x11.5x16) which works well on 8"-10" wide wheels (about the same as a 245-275mm width tire).
Hope that helps!
If you're putting out serious HP, Mickey Thompson makes a 16" version of their ET Street (26x11.5x16) which works well on 8"-10" wide wheels (about the same as a 245-275mm width tire).
Hope that helps!