Proclip Mount for iPhone
Thread Starter
Member
Joined: Apr 2008
Posts: 199
Likes: 0
2007 R320 CDI, 2010 FJ Cruiser, CTS-V
Proclip Mount for iPhone
Is anyone on the forum using the proclip mount for the iphone?
I am especially interested in the one that attaches to the center console.
Thanks
I am especially interested in the one that attaches to the center console.
Thanks
Member
Joined: Jul 2008
Posts: 122
Likes: 2
From: Texas
2011 S65
I have one for center vent/console. I didn't use the tape that came with in and just clipped on. It gave up and became too soft to bite on after several months under Texas sunshine.
However you don't want to mount it too low asking for distraction.
I used ProClip in four different models with mixed results. The vent mount, especially the one springs in vertical direction, flexes after a while because it has to bare phone weight in the spring direction. Other console mount that squeezes in between trim pieces in two different directions has better durability.
I hope I make myself understood.
However you don't want to mount it too low asking for distraction.
I used ProClip in four different models with mixed results. The vent mount, especially the one springs in vertical direction, flexes after a while because it has to bare phone weight in the spring direction. Other console mount that squeezes in between trim pieces in two different directions has better durability.
I hope I make myself understood.
MBWorld Fanatic!
Joined: Sep 2005
Posts: 6,192
Likes: 242
From: Albuquerque
'10 CL550, '12 GL550
