89" 420SEL Rear Window Regulator Slider "Jaw" How to Attach?
06-18-2018, 12:08 PM
#1
89" 420SEL Rear Window Regulator Slider "Jaw" How to Attach?
Have done many window regulator repairs over the years. Now on a 1989 420SEL (W126) I ordered a NEW Mercedes-Benz Window Regulator Guide Jaw - URO Parts 1267200042
This clip comes up with many Google searches.
Question is, I see the OLD OEM rectangle slider and see clearly it is held via a rivet PIN. But can't figure how this version till attach to the regulator arm.. Thoughts anyone ? It is a tight plastic multi part piece that appears not to require disassembly but scratching my head
https://www.eeuroparts.com/Parts/137...aw-1267200042/
https://www.autohausaz.com/pn/119656...RoCKOcQAvD_BwE
This clip comes up with many Google searches.
Question is, I see the OLD OEM rectangle slider and see clearly it is held via a rivet PIN. But can't figure how this version till attach to the regulator arm.. Thoughts anyone ? It is a tight plastic multi part piece that appears not to require disassembly but scratching my head
https://www.eeuroparts.com/Parts/137...aw-1267200042/
https://www.autohausaz.com/pn/119656...RoCKOcQAvD_BwE
The following users liked this post:
ndccpf1 (07-15-2018)
07-15-2018, 12:34 PM
#3
I found out that piece is also used on the window regulator but the one I needed is the slightly rectangular one chat slides left-to-right on the window base channel. I used the piece and modified it as part of it is the same size as the slider that always breaks (the left to right slider).
Window now working again...
Window now working again...
