1996 S420 w140 I had 2 questions
11-24-2008, 01:08 PM
#1
Newbie
Thread Starter
Join Date: Nov 2008
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
w140 s420
1996 S420 w140 I had 2 questions
I had 2 questions and hoping somebody can point me to the right way.
1st easy question, I’m looking for an engine and couldn’t find info on interchange of a models classes,
Somebody saying its 1992-1999 s320/420/500 some saying 1996-1999 s420 etc….. Please help with clarification
2nd question I replaced 2 cylinder head gaskets and now having a problem on adjusting the timing position, I did as a Software said(ALLDATA/WIS/Etc..) put on 45©, mark chains…… Etc
After I was done putting back everything it seem like intake valve are not letting it turn over on cylinder # 6 by about 2-1 tooth’s
Is there and good reference, if I want to take it apart and start over like from scratch, cyl 1, 45© etc…
Thank You, vary much.
1st easy question, I’m looking for an engine and couldn’t find info on interchange of a models classes,
Somebody saying its 1992-1999 s320/420/500 some saying 1996-1999 s420 etc….. Please help with clarification
2nd question I replaced 2 cylinder head gaskets and now having a problem on adjusting the timing position, I did as a Software said(ALLDATA/WIS/Etc..) put on 45©, mark chains…… Etc
After I was done putting back everything it seem like intake valve are not letting it turn over on cylinder # 6 by about 2-1 tooth’s
Is there and good reference, if I want to take it apart and start over like from scratch, cyl 1, 45© etc…
Thank You, vary much.
