1996 s320 cam and knock sensor codes keep coming back after replacement
#1
1996 s320 cam and knock sensor codes keep coming back after replacement
I replaced cam and both knock sensors but the codes came back.Took to auto zone to have codes cleared and they came back. Do I need a special tool to clear them?? Also car his a hesitation or slight misfire at times. Please if anyone has any suggestions I would greatly appreciate it!!! Thanks
#2
MBWorld Fanatic!
you may have to get codes cleared by dealer tool
#4
MBWorld Fanatic!
hesitation I'd clean the MAF,miss check plugs
#5
Member
Join Date: Apr 2011
Location: Northbridge, Ma.
Posts: 103
Likes: 0
Received 4 Likes
on
3 Posts
94 S420,95 S500 ,96 S500
I replaced cam and both knock sensors but the codes came back.Took to auto zone to have codes cleared and they came back. Do I need a special tool to clear them?? Also car his a hesitation or slight misfire at times. Please if anyone has any suggestions I would greatly appreciate it!!! Thanks