PLEASE HELP!!!! Getting codes on the dash
PLEASE HELP!!!! Getting codes on the dash
Hi everyone, hope someone can help me out
I am receiving different messages on the dash.
CHIP CARD NOT REGOGNIZED
LEFT TURN RIGHT TURN LAMP
MY HIGH BEAM KEEPS GOING ON AND OFF
MY LEFT TRUN SIGNAL GOES ON AND OFF
I also can hear in the morning a humming sound coming from the dash?? not sure if that has to do with anything
It also says 1 malfunctions which is my lisence plate bulb which is out
I took the battery cables off for about 10 min to maybe see is it would reset the computer. I than drove it and everything was fine but after 10 min it statred to sat the same thing again which was chip card not regognized, turn signal was going on/off as well as the high beam
Please help guys!!!!
I am receiving different messages on the dash.
CHIP CARD NOT REGOGNIZED
LEFT TURN RIGHT TURN LAMP
MY HIGH BEAM KEEPS GOING ON AND OFF
MY LEFT TRUN SIGNAL GOES ON AND OFF
I also can hear in the morning a humming sound coming from the dash?? not sure if that has to do with anything
It also says 1 malfunctions which is my lisence plate bulb which is out
I took the battery cables off for about 10 min to maybe see is it would reset the computer. I than drove it and everything was fine but after 10 min it statred to sat the same thing again which was chip card not regognized, turn signal was going on/off as well as the high beam
Please help guys!!!!
Last edited by silva s500; Apr 5, 2008 at 02:09 PM.


