Don Nguyen

I've had people ask if I can vinyl wrap hard tops and just how flexible my vinyl is...

Let me know if this answers your questions, and if you have any others

















-Don

donathon@gmail.com

classyS

very nice pics.. just wondering if u have done any di-noc/matte on s-class w220 silver??

thanks

Don Nguyen

Unfortunately I haven't had any S class guys come to me to get any work done yet, or I would take pictures of it for you guys

Who wants to be the first?

-Don

Don Nguyen

Vinyl wrapped the hood of this Acura RSX in the 3M di-noc carbon fiber vinyl. Don't mind the dusty marks/shadows. Forgot to clean it off before taking the pictures.

Just to be clear, since I know I'll have some people ask me if I can wrap their hoods. The material is not wide enough to wrap/do most hoods, except on smaller cars, such as this RSX. If you're interested in getting your hood wrap, measure your hood beforehand and give me the measurements of your car, so that way I can determine if it'd be possible or not.







-Don

donathon@gmail.com

Don Nguyen

Vinyl roof wrapped this R35 GTR's roof with some 3M Di-Noc carbon fiber vinyl, and also did the center of his rear spoiler.

Let me know what you guys think.













-Don

donathon@gmail.com

Don Nguyen

Is this a sign that I should do an east coast tour?

http://www.southwest.com/landing/hal...OHALWOW101026#

Don Nguyen

Vinyl wrapped the roof of this BMW E92 M3 in the carbon fiber 3M di-noc material.

Just to avoid any confusion, his antenna was painted matte black, not wrapped. Also, it was only placed on there temporarily for pictures, hence why you can see a gap between the antenna cover and roof in some of the pictures.

Let me know what you guys think.

















-Don

donathon@gmail.com

Don Nguyen

What finish?

Here's pictures of a white BMW E90 3 series that I vinyl wrapped the roof with in gloss black. He also had black wheels, so it'll give those who are curious how the black roof works with black wheels.













-Don

donathon@gmail.com

Don Nguyen

How about something a bit different. Here's a new Honda Insight that I vinyl wrapped the roof with in matte black.















-Don

donathon@gmail.com

Don Nguyen

Some real quick pictures. Here's some tails on an Nissan Altima that I tinted/wrapped with a red clear vinyl film:

Before:




After:






-Don

donathon@gmail.com

Don Nguyen

Here are pictures of the fogs that I vinyl wrapped/tinted in a yellow film.

Let me know if any of you would be interested in getting this done on your cars.







-Don

Don Nguyen

Smoked/tinted the tails on this new Mercedes E class. Trimmed out the reverse/turn signal portions as well for him.

Let me know what you guys think.









-Don

donathon@gmail.comm

Don Nguyen

Vinyl wrapped the roof of this E60 BMW 550i in gloss black material.

I know almost all of my pictures of white cars, but I must admit, they do look the best on white cars. Although, I do wish cars of other colors would come by to get it done, and add a little bit more of variety, haha.













-Don

donathon@gmail.com

tuflon

Dont see how this would look right on a s class.

Don Nguyen

Vinyl wrapped this white E92 2-door BMW 3 series's roof in gloss black vinyl.















-Don

donathon@gmail.com

Don Nguyen

Here's a white C300 Mercedes that I vinyl wrapped the roof in gloss black for. Note, the roof/side rails were already black, and so was the antenna.



















-Don

donathon@gmail.coms

Don Nguyen

I may mildly regret posting these pictures, but I had some people ask me if I've done it before, and to post pictures if I do/have. Well, here are pictures of an aftermarket Mercedes C class front grill that I vinyl wrapped in the 3M Di-noc carbon fiber material.

Now note, it's not really possible...actually let me rephrase that...it's not really practical to wrap some of the grills that are out there, due to its design and shapes. However, this one is one of those exceptions.

Sorry for the pictures, I didn't have much lighting, and had to use a flash to even get the weaves to show. Let me know what you guys think.





-Don

donathon@gmail.com

Don Nguyen

Here are some of the pictures of the tail lights that I vinyled over this weekend. Smoked/tinted the entire tail light on this BMW E60 535i. Yes, it is a film that I use, not spray/paint/etc.









-Don

donathon@gmail.com

Don Nguyen

Here are pictures of the tail lights that I tinted with a red vinyl film for on this Subaru WRX. I cut out the reverse/turn light pieces for him as well.

For those who don't know what these tails looked like before I tinted it, here's a stock picture for reference.

Before:



After:







-Don

donathon@gmail.com

Don Nguyen

Blacked out the window trim on this E60 5 series with some matte black vinyl. They were originally chrome, and the owner wanted to get rid of them, to go with a more blacked out/murdered out look for his car. Everything is done in one piece, no seam lines anywhere, even on the rear doors where it curves downwards.

I forgot to take some before/after pictures, until I was half way done, so here's the best I have of a comparison of the chrome (bottom trim) compared to the trim that I wrapped (top trim) already in matte black.





Finished result:





-Don

donathon@gmail.com

Don Nguyen

Been doing quite a few tail lights. Here are some pictures of the tails that I tinted/smoked with a vinyl/film on this BMW E60 5 series.







-Don

donathon@gmail.com

Don Nguyen

Another fellow Orange County member on another forum that I am on came by with his white E60 BMW M5 to have his roof vinyl wrapped with the 3M di noc carbon fiber.

Here are some pictures that I took of it. Let me know what you guys think.

















-Don

donathon@gmail.com

Don Nguyen

I had a car come by (E92 BMW 3 series coupe), to have me vinyl wrap his window trim with black vinyl to cover the chrome/aluminum finish. He had done one side, but decided that he wanted me to finish/wrap his other side. He had originally purchased some "matte black" vinyl from another competing vendor.

Note the differences in the finish between my vinyl and my competitors vinyl, and how my material actually has a black sheen/finish to it compared to theirs, which is almost a faded black or greyish color (this was brand new material, that the owner had just purchased/put on a week before). Also note, I did not do the install on this side of the window trim, as I do all of my window trim installs in a single continuous piece, without any seams.

Luckily for the owner of this car, I have several shades of black that I keep on hand, and was able to match the material he had already used. This saved him from having two different shades on either side of the car, or having to completely redo the window trim that was already done.









-Don

donathon@gmail.com

Don Nguyen

Although I vinyl/black out window trims fairly often, it's not too often/common that I have someone request or ask me to wrap their window trims in gloss black (instead of matte black).

So for those who are curious what it looks like, this is what a gloss black vinyl wrapped window trim looks like. Did this on an E46 BMW 325i black coupe. Owner drove from Fullerton/Orange County.











-Don

donathon@gmail.com

Don Nguyen

Ran across pictures of this car that I did several months back. The owner of this car drove up from San Diego area, or around Carlsbad, to me in Orange County to have me vinyl wrap his roof in gloss black material. It is a Mercedes E55, and I think the color of the car is called pewter. I think the gloss roof and the color of the car went nicely together.









-Don

donathon@gmail.com