radio doesnt work no sound - Page 2

Dec 4, 2013 | 03:20 PM

#26

corkshoppe

Super Member

Joined: Sep 2010

Posts: 544

Likes: 22

From: Texas

13's550/2000's430/13'gl63/'13's550/10's63

what if the amp is bad? the loop will go around but the amp might not be putting out any sound!

Dec 4, 2013 | 10:42 PM

#27

vmystikilv

Super Member

Joined: Feb 2009

Posts: 780

Likes: 11

From: Dallas, TX

Range Rover

If the amp is bad the diagnostic will say. Hold mute, the button 1 and the button 3 at the same time . It will bring you to the diagnostic menu. Once done post pic of diagnostic screen and will go from there

You have to hold those buttons for about 5 seconds

Last edited by vmystikilv; Dec 5, 2013 at 07:31 AM.

Jul 12, 2015 | 07:32 PM

#28

Russell Waseem

Newbie

Joined: Jul 2015

Posts: 5

Likes: 0

Quote:

Originally Posted by fyllomirea

hello i have a 2000 s500. my radio doesnt work, no sound, voice commands, navigation,the phone, and even the cd changer doesnt work. the screen is on but nothing, every now and then the sound comes back on and as soon as i turn off the car, back to no sound. also i hear a beeping sound at least 5 times a day.i have disconnected the negative and nothing, i havent tried anything with the cd changer yet. and dont know what to do with the phone, if there is a hard reset or something. i would greatly appriciate all suggestions, to helping me solve the problem with the radio. thanks

please help.

I have the problem where I'm receiving no sound. I have the D2B. I checked the fiber optic lights and it seems to be that everything blinks expect the light from the amp. Although thru the cable the light blinks. Does this mean I have a bad amp? Plus I tried taking a remote lead for my sub amp and I tapped into a blue/black wire from the amp by the fuse... did mess up my cd changer seems to function fine, meaning ejecting and stuff..should try getting a coupler for the cd changer? I disconnected the negative terminal too, no luck.

Reply Subscribe