CAN BUS
CAN BUS
The following users liked this post:
Desmodeux (05-14-2021)
05-14-2021, 06:29 PM
#3
05-15-2021, 09:32 AM
#4
MBWorld Fanatic!
That appears to be just a CAN bus connector - that is, just a convenient place to plug in bus leads. You should be able to find a couple of small slots somewhere that the harness will easily reach to snap it in place to hold it up out of the way.
No idea on the unused single connector - but it is not unusual to find such connectors scattered around the car, intended for an option that was not included in your car's build.
No idea on the unused single connector - but it is not unusual to find such connectors scattered around the car, intended for an option that was not included in your car's build.
The following users liked this post:
Desmodeux (05-15-2021)
05-15-2021, 10:05 AM
#5
That appears to be just a CAN bus connector - that is, just a convenient place to plug in bus leads. You should be able to find a couple of small slots somewhere that the harness will easily reach to snap it in place to hold it up out of the way.
No idea on the unused single connector - but it is not unusual to find such connectors scattered around the car, intended for an option that was not included in your car's build.
No idea on the unused single connector - but it is not unusual to find such connectors scattered around the car, intended for an option that was not included in your car's build.
05-15-2021, 03:13 PM
#6
MBWorld Fanatic!
It's not that kind of connector - it has everything plugged into it that it needs. It is just an interconnector for all of those brown and brown/red wires that are all part of the CAN bus. All you need to find is the bracket or slots where that connector is stored to keep it from rattling.
The following users liked this post:
Desmodeux (05-15-2021)
05-15-2021, 07:08 PM
#7
It's not that kind of connector - it has everything plugged into it that it needs. It is just an interconnector for all of those brown and brown/red wires that are all part of the CAN bus. All you need to find is the bracket or slots where that connector is stored to keep it from rattling.
Thanks 🙏🏻
The following users liked this post:
camplate (05-18-2021)
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
