No power off the line in tt v12?
Thread Starter
Member
Joined: Jan 2007
Posts: 238
Likes: 2
From: ca
2003 s600
No power off the line in tt v12?
I just got my car back from body shop and I floor it from a stop and it upshifts, does not spin wheels and no power off the line. What could be the problem? They replaced all radiators, oil cooler, heat exch, ac condenser, rad fan. Tranny fluid level ok. All vacuum hoses look ok. This has kleemann ecu/tcu so it normally lights up tires even with esp on.????????
Member
Joined: Aug 2003
Posts: 103
Likes: 0
From: Daytona Beach, Florida
'08 Dodge Dually 3500 CTD, '07 Suburban, 2007 MB S550, 2008 Z06, 2008 997TT
If they are a Benz dealer make sure thay didnt reset your ECU. My local dealer undid my Kleeman tune for my car and it ran like crap. I had to send it back to C2 design to get redone.
MBWorld Fanatic!
Joined: May 2007
Posts: 2,071
Likes: 2
2007 S600
I just got my car back from body shop and I floor it from a stop and it upshifts, does not spin wheels and no power off the line. What could be the problem? They replaced all radiators, oil cooler, heat exch, ac condenser, rad fan. Tranny fluid level ok. All vacuum hoses look ok. This has kleemann ecu/tcu so it normally lights up tires even with esp on.????????
Thread Starter
Member
Joined: Jan 2007
Posts: 238
Likes: 2
From: ca
2003 s600
Had dealer run codes and diagnose, boost and tranny codes came up: P2001 Charge pressure too low and P2318 One or more messages from control unit N15/5 (Electronic selector lever module control unit) are not available on the CAN bus. (CAN timeout fault) ---both current and stored. Anyone know what I need to do?
