W221 S-Class Headlamp Retrofit
#52
Junior Member
Join Date: Jun 2005
Location: socal
Posts: 69
Likes: 0
Received 0 Likes
on
0 Posts
S550
#53
MBWorld Fanatic!
#54
Junior Member
Join Date: Jun 2005
Location: socal
Posts: 69
Likes: 0
Received 0 Likes
on
0 Posts
S550
#55
MBWorld Fanatic!
#58
MBWorld Fanatic!
#62
SPONSOR
Thread Starter
#65
Senior Member
Join Date: Jun 2004
Location: LI, NY
Posts: 382
Likes: 0
Received 2 Likes
on
2 Posts
(1960) 300d, S550 AMG S500 S600 560SEL
night vision camera is located in front center of the condenser coil and radiator and it has its own sensor and functions separately from the headlights. With or without the headlights if you decide to activate the camera it will work independently.
#66
MBWorld Fanatic!
Join Date: Dec 2006
Location: Europe
Posts: 6,376
Received 295 Likes
on
247 Posts
223.168 & 213.012 & 906.633 & 214.005
ILS lights at least in Europe mean automatic high beam switching and adaptive light patterns and beam range (not just high beams on/off). This works from a camera at the windscreen, has the camera been retrofitted along with the new headlights then too?
Does OEM functionality here mean the same as the pre-facelift car had from the factory or the same functionality as the facelift car would have with these new headlights?
I guess you were after the IR emitters at the head lights? Night view would work without these emitters but would lose performance (range). But I don't see why the new lights could not have IR emitters too.
Does OEM functionality here mean the same as the pre-facelift car had from the factory or the same functionality as the facelift car would have with these new headlights?
I guess you were after the IR emitters at the head lights? Night view would work without these emitters but would lose performance (range). But I don't see why the new lights could not have IR emitters too.
#69
#70
The is all you need for facelift or contact the
http://www.carworld-berlin.com/index...di3h9do64ufk07
http://www.carworld-berlin.com/index...di3h9do64ufk07
Last edited by justforfon; 03-11-2012 at 08:22 PM.
#74
#75
Recap, please!
Your adapter loom has resistors or not?
The Active Curvenlight (Not Cornering) will work?
The DRL dimm when low beam is active?
How do you turn on the DRL?
As I know the old SAM can not light up the DRL without hardware/software modification.