Head Rest Removal w221
#1
Member
Thread Starter
Head Rest Removal w221
Does anyone have a .pdf or good instructions on how to remove and reinstall the driver and passenger headrest with power chords?
Thanks~
Thanks~
#2
MBWorld Fanatic!
That is SO simple...Just losen the 2 screws in the bottom of the back cover. Drag it down and then you losen the 2 locksprints on the headrest then just pull them up.
#4
Member
Join Date: Jul 2012
Location: Long Island, NY
Posts: 124
Received 0 Likes
on
0 Posts
2014 GL 450
![crazy](https://mbworld.org/forums/images/smilies/crazy.gif)
#5
Senior Member
Join Date: Oct 2011
Location: Chicago, Illinois
Posts: 398
Likes: 0
Received 12 Likes
on
10 Posts
2008 S63
Carefully pull of the back cover off. This will expose the powered headrest height motor to which where the 2 headrest post pop into.
Lean your seat way back for clearance, gently tug on the headrest to loosen the, from the motor.
Opposite for reverse but be sure when you slide the headrest back in that you get both of the post to sit directly in the locations on the motor. If you decide not to remove the back cover, you will be guessing if the headrest got in their respective locations. If you force it in without lining them up, you can accidentally break the delicate plastic on the motors post mounts.
#6
Member
Join Date: Jul 2012
Location: Long Island, NY
Posts: 124
Received 0 Likes
on
0 Posts
2014 GL 450
On the bottom part of the back of the seat there are two screws to remove.
Carefully pull of the back cover off. This will expose the powered headrest height motor to which where the 2 headrest post pop into.
Lean your seat way back for clearance, gently tug on the headrest to loosen the, from the motor.
Opposite for reverse but be sure when you slide the headrest back in that you get both of the post to sit directly in the locations on the motor. If you decide not to remove the back cover, you will be guessing if the headrest got in their respective locations. If you force it in without lining them up, you can accidentally break the delicate plastic on the motors post mounts.
Carefully pull of the back cover off. This will expose the powered headrest height motor to which where the 2 headrest post pop into.
Lean your seat way back for clearance, gently tug on the headrest to loosen the, from the motor.
Opposite for reverse but be sure when you slide the headrest back in that you get both of the post to sit directly in the locations on the motor. If you decide not to remove the back cover, you will be guessing if the headrest got in their respective locations. If you force it in without lining them up, you can accidentally break the delicate plastic on the motors post mounts.
![Confused](https://mbworld.org/forums/images/smilies/confused.gif)