**Don Nguyen | Vinyl roof wrapping, tail light tinting, black out chrome trim install
Thread Starter
Former Vendor of MBWorld
Joined: Mar 2008
Posts: 19,593
Likes: 30
From: Irvine, CA
Euros
For this silver Mercedes Benz C300 sedan, I blacked out the silver and chrome areas of the grill in a matte black finish with plasti dip. In addition to the grill, I applied a light tint/smoke film to the chrome part of the blinkers on side mirrors. I think the black grill drastically changed the look of the car and gave it a more aggressive look. The good part about plasti dip is it is reversible and is removable just like vinyl. The owner of this car came out from Inland Empire area to me in Anaheim Hills/Orange County to get the work done.
Before:
After:
-Don Nguyen
donathon@gmail.com
Before:
After:
-Don Nguyen
donathon@gmail.com
Thread Starter
Former Vendor of MBWorld
Joined: Mar 2008
Posts: 19,593
Likes: 30
From: Irvine, CA
Euros
-Don
Thread Starter
Former Vendor of MBWorld
Joined: Mar 2008
Posts: 19,593
Likes: 30
From: Irvine, CA
Euros
Did something slightly different on these tails than most of the pictures you guys usually see of me tinting/smoking the tails. For this silver Mercedes Benz C32 AMG sedan, I applied a transparent red film over the white portions of the rear tail light blinker areas, so that the white/clear portions matched the rest of the red on the tail lights. It’s a subtle change that changes the way the car looks and is still reversible for if the owner decided to go back to factory later on when selling the car or if they just want to change the look up again. I did this car during one of my norcal/bay area trips.
Right/driver side red clear film applied - Left/passenger side stock
Before:
After:
-Don Nguyen
donathon@gmail.com
Right/driver side red clear film applied - Left/passenger side stock
Before:
After:
-Don Nguyen
donathon@gmail.com
Thread Starter
Former Vendor of MBWorld
Joined: Mar 2008
Posts: 19,593
Likes: 30
From: Irvine, CA
Euros
The owner of this white Ferrari FF coupe has had several of his previous cars worked on by me in the past for different vinyl wrap projects. *For his Ferrari FF, we went with the my gloss black vinyl materials for the roof of his car to give it a panoramic roof look and also give it a more aggressive look. *Even though the car already stands out from other cars, the gloss black roof really changed the look of the car even more in a positive way. *The owner of this car was local to me in Yorba Linda and came out to my shop in Orange County to have the vinyl work done. *Also, the purple hue in the pictures was because this car was finished just as the sun was going down and the lighting of the sky was a bit purpleish that day, which translated over into the pictures.
Before:
After:
-Don Nguyen
donathon@gmail.com
Before:
After:
-Don Nguyen
donathon@gmail.com
Thread Starter
Former Vendor of MBWorld
Joined: Mar 2008
Posts: 19,593
Likes: 30
From: Irvine, CA
Euros
This brand new matte grey Mercedes Benz GLA45 AMG came by to have me lightly smoke/tint the tail lights of his car. In addition to doing the tail lights, I also blacked out the chrome trunk and bumper bars, to complete the blacked out gloss black look on the rest of the car. The film is a very light shade, meant to give it a very factory or as I would like to call an OEM+ look. It’s subtle enough that if you didn’t know there was a film on there, you would have thought it came like this from the factory. The owner of this car was from Los Angeles and drove out to me in Orange County/Anaheim Hills to get the tint work done.
Before:
After:
-Don Nguyen
donathon@gmail.com
Before:
After:
-Don Nguyen
donathon@gmail.com
Thread Starter
Former Vendor of MBWorld
Joined: Mar 2008
Posts: 19,593
Likes: 30
From: Irvine, CA
Euros
These pictures are slightly over exposed, but I wanted the details of the parts that were actually being wrapped to show up in the pictures better. The owner of this white Mercedes Benz C300 W205 sedan had me vinyl wrap the lower front bumper chrome lip and also the body colored rear diffuser on his car with my gloss black vinyl material. Blacking out these pieces really cleaned up the look of the car and gave it a sportier look, since the immediate pieces around it were already black as well. The owner of this car came out to me in Anaheim Hills/Orange County to have the vinyl work done.
Before:
After:
-Don Nguyen
donathon@gmail.com
Before:
After:
-Don Nguyen
donathon@gmail.com
Last edited by Don Nguyen; Feb 18, 2015 at 04:36 PM.
Thread Starter
Former Vendor of MBWorld
Joined: Mar 2008
Posts: 19,593
Likes: 30
From: Irvine, CA
Euros
These pictures are slightly over exposed, but I wanted the details of the parts that were actually being wrapped to show up in the pictures better. The owner of this white Mercedes Benz C300 W205 sedan had me vinyl wrap the lower front bumper chrome lip and also the body colored rear diffuser on his car with my gloss black vinyl material. Blacking out these pieces really cleaned up the look of the car and gave it a sportier look, since the immediate pieces around it were already black as well. The owner of this car came out to me in Anaheim Hills/Orange County to have the vinyl work done.
Before:
After:
-Don Nguyen
donathon@gmail.com
Before:
After:
-Don Nguyen
donathon@gmail.com
Thread Starter
Former Vendor of MBWorld
Joined: Mar 2008
Posts: 19,593
Likes: 30
From: Irvine, CA
Euros
For this black Mercedes Benz E55 AMG Sedan, I lightly tinted/smoked the tail lights of the car with a vinyl film. The darker tail lights matched the darker theme of the car fairly well, with the car already having blacked out wheels, exhaust tips, etc. The film is a fairly light shade, so light output is minimally affected, unlike tail lights that are completely blacked out. The owner of this car was from around Huntington Beach I believe, and came out to me in Anaheim Hills/Orange County to have the vinyl wrap work done on his tail lights.
Before:
Driver/left side tinted/smoked - Passenger/right side stock:
After:
-Don Nguyen
don@wannaberacer.com
Before:
Driver/left side tinted/smoked - Passenger/right side stock:
After:
-Don Nguyen
don@wannaberacer.com
MB World Stories
The Best of Mercedes & AMG
Manual Mercedes? 6 Times Sindelfingen Let Drivers Have All The Fun
Verdad Gallardo
Mercedes SLR McLaren 722 S Is Extremely Rare Example Modified by McLaren
Verdad Gallardo
8 Classic Boxy Mercedes Designs That Have Aged Like Fine Wine
Verdad Gallardo
Flawlessly Restored Mercedes 190E Evo II Heads to Auction
Verdad Gallardo
Electric Mercedes C-Class Unveiled: 11 Things You Need to Know
Verdad Gallardo
Mercedes EQS Gets A Major Update: Everything You Need to Know
Verdad Gallardo
5 Underrated Mercedes-Benz Models That Don't Get the Love They Deserve
Verdad Gallardo
Mercedes 300D Has Pushed Well Past 1 Million Miles and It Ain't Stopping
Verdad Gallardo
10 Most Reliable Mercedes-Benz Models You Can Buy Used
Verdad Gallardo
Thread Starter
Former Vendor of MBWorld
Joined: Mar 2008
Posts: 19,593
Likes: 30
From: Irvine, CA
Euros
I forgot to take pictures for the before for this white Mercedes Benz CLA 250 sedan, before wrapping the roof of the car in my gloss black vinyl material. We went with the gloss black finish car wrap for his roof to give it the panoramic roof look. The owner of this car was from Brea and drove out to me in Anaheim Hills/Orange County to have the car wrap done for his roof. Since there was no sunroof on the car, the roof wrap provided a continuous clean look from the back of the roof of the front of the roof.
-Don Nguyen
don@wannaberacer.com
-Don Nguyen
don@wannaberacer.com
Thread Starter
Former Vendor of MBWorld
Joined: Mar 2008
Posts: 19,593
Likes: 30
From: Irvine, CA
Euros
This is a bit different, but I know you guys seeing more pictures of various and different type of wrap jobs than the regular roof, trim, etc wraps. I did a partial car wrap for the top half of this 2013 white Land Rover LR4 HSE. For this car wrap, we did the top half of the car in 3M 1080 gloss black vinyl material. I believe the owner of this car said that it’s suppose to resemble how the new Range Rover Autobiography editions come from the factory. I took two pictures of the during vinyl wrapping process, to show you guys how what it looks like during the transformation. The owner of this car was in Irvine and came out to me in Anaheim hills/Orange county to have the car wrap done for his car.
Before:
After:
-Don Nguyen
don@wannaberacer.com
Before:
After:
-Don Nguyen
don@wannaberacer.com
Thread Starter
Former Vendor of MBWorld
Joined: Mar 2008
Posts: 19,593
Likes: 30
From: Irvine, CA
Euros
This is a bit different, but I know you guys seeing more pictures of various and different type of wrap jobs than the regular roof, trim, etc wraps. I did a partial car wrap for the top half of this 2013 white Land Rover LR4 HSE. For this car wrap, we did the top half of the car in 3M 1080 gloss black vinyl material. I believe the owner of this car said that it’s suppose to resemble how the new Range Rover Autobiography editions come from the factory. I took two pictures of the during vinyl wrapping process, to show you guys how what it looks like during the transformation. The owner of this car was in Irvine and came out to me in Anaheim hills/Orange county to have the car wrap done for his car.
Before:
After:
-Don Nguyen
don@wannaberacer.com
Before:
After:
-Don Nguyen
don@wannaberacer.com
Thread Starter
Former Vendor of MBWorld
Joined: Mar 2008
Posts: 19,593
Likes: 30
From: Irvine, CA
Euros
More and more chrome keeps appearing on the newer Mercedes that have been coming out, so more than ever, I have been getting a lot of Mercedes owners coming by to have the chrome blacked out on their cars. The owner of this black Mercedes Benz E class sedan had me apply a gloss black vinyl film to all of the window trim, front lower bumper lip, rear bumper diffuser, and chrome trunk bar to completely get rid of all of the chrome on the car. The owner of this car was from Los Angeles and came out to me in Anaheim Hills/Orange County to have the car wrap for his vehicle done.
Before:
After:
-Don Nguyen
don@wannaberacer.com
Before:
After:
-Don Nguyen
don@wannaberacer.com
Thread Starter
Former Vendor of MBWorld
Joined: Mar 2008
Posts: 19,593
Likes: 30
From: Irvine, CA
Euros
For this red Ferrari 458 I plasti dipped the front, rear, and top engine lid emblems/badges. I also blacked out the amber portion on his front bumper with my gloss black vinyl. For such a simple change, it really changed the look of the car quite a bit. Since there were no other chrome pieces on the car, after blacking out those chrome badges, it gave the car a sportier and more aggressive look, while cleaning up overall look of the car as well. The owner of this car was local to me and brought his car out to me in Anaheim Hills/Orange County to have the plastic dip and vinyl work done.
Before:
After:
-Don Nguyen
don@wannaberacer.com
Before:
After:
-Don Nguyen
don@wannaberacer.com
Thread Starter
Former Vendor of MBWorld
Joined: Mar 2008
Posts: 19,593
Likes: 30
From: Irvine, CA
Euros
The owner of this silver Mercedes Benz C63 AMG sedan came out to me in Anaheim Hills/Orange County from Los Angeles to have me apply a gloss black vinyl roof car wrap for his car. People usually say white cars look the best with gloss black roofs, but I actually think it looks awesome on silver cars. The gloss black roof compliments the silver and other carbon fiber/black accents on the the car perfectly.
Before:
After:
-Don Nguyen
don@wannaberacer.com
Before:
After:
-Don Nguyen
don@wannaberacer.com
Thread Starter
Former Vendor of MBWorld
Joined: Mar 2008
Posts: 19,593
Likes: 30
From: Irvine, CA
Euros
This is a returning customer who had me previous lightly tint the tail lights on his E92 M3. This time he had me come back to do the tail lights on his Audi V10 R8 as well. The film that I use is a fairly light shade, which is dark enough to give it a nice noticeable change and also still maintain a factory/OEM look. The owner of this car was in Irvine/Orange County near where I was so I dropped by his house to do the tail lights for his car.
Before:
After:
-Don Nguyen
don@wannaberacer.com
Before:
After:
-Don Nguyen
don@wannaberacer.com
Thread Starter
Former Vendor of MBWorld
Joined: Mar 2008
Posts: 19,593
Likes: 30
From: Irvine, CA
Euros
On this brand new white Mercedes Benz W205 C350 sedan I blacked out the factory chrome/brushed aluminum window trim surround with my gloss black vinyl material. Blacking out the chrome on the sides of the car with the gloss black vinyl car wrap really cleans up the lines on the side of the car, especially with the tinted windows that this car already had. I took quite a few before pictures at various angles to show how much of a chance it was from the before/after. The owner of this car was from Irvine and came out to me in Anaheim Hills/Orange County to have the car wrap done.
Before:
After:
-Don Nguyen
don@wannaberacer.com
Before:
After:
-Don Nguyen
don@wannaberacer.com
Thread Starter
Former Vendor of MBWorld
Joined: Mar 2008
Posts: 19,593
Likes: 30
From: Irvine, CA
Euros
The owner of this silver/grey Mercedes GTS AMG coupe came by to have me black out the chrome badges and emblems. I plasti dipped the rear emblems, front hood emblem and the star on the front grill. For the chrome horizontal slats on the front grill, I wrapped those in my gloss black vinyl, to match the gloss black grill that they were attached to already. The owner of this car was from Orange County and came out to me in Anaheim Hills to have the plasti dip and vinyl work done. I like the way the hood emblem turned out. The details in the emblem were not lost after being plasti dipped. The matte finish gives it a more interesting look.
Before:
After:
-Don Nguyen
don@wannaberacer.com
Before:
After:
-Don Nguyen
don@wannaberacer.com
Thread Starter
Former Vendor of MBWorld
Joined: Mar 2008
Posts: 19,593
Likes: 30
From: Irvine, CA
Euros
It’s been several months seen I have had a chance to post some pictures. Been extremely busy, so haven’t had a chance to post some of the work/cars that I have been doing. The owner of this white Lamborghini Hurrican brought his car by to black out the amber reflectors on the front and rear bumpers of the car. In addition to blacking those pieces out, I also plasti dipped the rear Lamborghini badge in matte black to basically get rid of the only chrome piece on the vehicle’s exterior. Overall, the work done was fairly simple, but these small changes still changed the look of the car up and gave everything a nice black and white color scheme. The owner of this car brought his car to me in Anaheim Hills/Orange County to have the vinyl and plasti dip work done.
Before:
After:
-Don Nguyen
don@wannaberacer.com
Before:
After:
-Don Nguyen
don@wannaberacer.com
Thread Starter
Former Vendor of MBWorld
Joined: Mar 2008
Posts: 19,593
Likes: 30
From: Irvine, CA
Euros
Starting to see more AMG S editions come in to get vinyl work done. For the owner of this particular white Mercedes Benz C63S, he brought his car by to have me vinyl wrap what little brushed aluminum / chrome that was still left on the car around the window trim, lower side skirts, front and rear lower bumper trim pieces. We went with gloss black for wrapping all of the chrome, to give it an OEM gloss finish and also match the other gloss black accents that were already on the car. The owner of this car brought his car to me in Anaheim Hills/Orange County to have the vinyl car wrap work done.
Before:
After:
-Don Nguyen
don@wannaberacer.com
Before:
After:
-Don Nguyen
don@wannaberacer.com
Thread Starter
Former Vendor of MBWorld
Joined: Mar 2008
Posts: 19,593
Likes: 30
From: Irvine, CA
Euros
For some reason, as each generation of Mercedes progresses, they seem to get more and more chrome. The owner of this car had me black out almost all of the chrome pieces in the car with my gloss black vinyl material. I vinyl wrapped the front lower bumper chrome trim, the chrome on the lower side skirts, the window trim, the rear lower bumper trim and also the trunk trim pieces all in gloss black. The owner of this car came out to me in Anaheim Hills / Orange County to have the vehicle wrap done. Not everything was blacked out on the car. Some chrome accents such as the grill, door handles and rear badges were left, which still provided a good amount of contrast with the car.
Before:
After:
-Don Nguyen
don@wannaberacer.com
Before:
After:
-Don Nguyen
don@wannaberacer.com
Thread Starter
Former Vendor of MBWorld
Joined: Mar 2008
Posts: 19,593
Likes: 30
From: Irvine, CA
Euros
The owner of this black Mercedes Benz ML350 Bluetech SUV has had me do other vinyl work on his car in the past. This time around, he had me lightly tint/smoke the tail lights of his car with my film. I did both the tail lights and the bottom bumper reflectors to match the tail lights. In addition to the tail lights, I also debaged the rear ML350 and Bluetech emblems for his car, to clean up the rear of the car some more. The owner of this car was from Irvine and came out to me in Anaheim Hills/Orange County to have the vinyl work done.
Before:
After:
-Don Nguyen
don@wannaberacer.com
Before:
After:
-Don Nguyen
don@wannaberacer.com
Thread Starter
Former Vendor of MBWorld
Joined: Mar 2008
Posts: 19,593
Likes: 30
From: Irvine, CA
Euros
The owner of this grey Mercedes Benz came by to have me vinyl wrap the chrome / brushed aluminum window trim on the car with my gloss black vinyl car wrap material. The owner of the car came out to me in Anaheim Hills / Orange County from around Burbank / Los Angeles to have me do the vinyl work. The gloss black window trim worked well with the car, especially because the B pillar of the car was already gloss black. I took some close up pictures of the window trim area after it was wrapped to show the level of detail that’s involved in my wraps and how much coverage I am able to get with the vinyl material. The gloss black trim is able to maintain a factory look without looking like it was aftermarket or done afterwards. There’s still enough other chrome accents on the car to give it some contrast still as well.
Before:
After:
-Don Nguyen
don@wannaberacer.com
Before:
After:
-Don Nguyen
don@wannaberacer.com
Thread Starter
Former Vendor of MBWorld
Joined: Mar 2008
Posts: 19,593
Likes: 30
From: Irvine, CA
Euros
This is quite different from my typical wraps that you see me posting. However, it is still a service that I offer that many probably do not know about. The owner of this older blue Mustang needed to have some cut graphics / decals installed on his lower rocker panel area. The car itself is not a actual GT500, from what I was told, but I don’t know too many details or anything about older Mustangs unfortunately. He brought his car to me in Anaheim Hills / Orange County from Cerritos to have me install the graphics on his car. So for those who have graphics or decals that need to be installed, feel free to contact me with any questions you may have.
Before:
After:
-Don Nguyen
don@wannaberacer.com
Before:
After:
-Don Nguyen
don@wannaberacer.com
Thread Starter
Former Vendor of MBWorld
Joined: Mar 2008
Posts: 19,593
Likes: 30
From: Irvine, CA
Euros
Surprisingly, this is becoming more of a common occurrence, even on fairly new cars (5-7 years old). I used to see this kind of issue more on Hondas and Acuras, but apparently a lot of black BMW E60 5 series have been showing up with similar issues in their paint. This black BMW E60 550 sedan had me wrap the roof of his car in my gloss black vinyl material to help cover up the oxidizing and fading factory paint. The gloss black wrap is a fairly close match to the gloss jet black finish of the BMW’s factory paint, making this a cheaper alternative to having to repaint the whole roof. The owner of this car came out to me in Anaheim Hills / Orange County from Oceanside / San Diego to have the vinyl wrap done on his roof.
Before:
After:
-Don Nguyen
don@wannaberacer.com
Before:
After:
-Don Nguyen
don@wannaberacer.com
Thread Starter
Former Vendor of MBWorld
Joined: Mar 2008
Posts: 19,593
Likes: 30
From: Irvine, CA
Euros
I think a lot of people believe that I only work on local cars, however, I actually have good amount of non-local or out of state customers as well who ship me parts to have wrapped. The most common items that I have people send to me to have wrapped are interior trim pieces.
For this particular non-local customer, they removed and shipped me their interior trim pieces to have me wrap it in the 3M Di noc matte carbon fiber vinyl material. The original finish was wood, which was a bit older and worn out, so the owner wanted to change up the look of his interior and clean it up at the same time. I only took pictures of the larger more complex pieces, just to show the level of detail that is involved in the wraps that I do.
-Don Nguyen
don@wannaberacer.com
For this particular non-local customer, they removed and shipped me their interior trim pieces to have me wrap it in the 3M Di noc matte carbon fiber vinyl material. The original finish was wood, which was a bit older and worn out, so the owner wanted to change up the look of his interior and clean it up at the same time. I only took pictures of the larger more complex pieces, just to show the level of detail that is involved in the wraps that I do.
-Don Nguyen
don@wannaberacer.com
