Easy Entry/Exit Feature
Junior Member
Joined: Mar 2012
Posts: 31
Likes: 2
w221 s350
You can turn this feature on by COMMAND > Vehicle > Easy-entry/exit feature > Off | Steering Column | Steering Column and Seat
When you turn off the ignition, the steering moves up and seat backwards for easy exit. Once you get back in and turn the ignition on, the steering+seat return to previous position. I think your car should have seat memory option for this to work?
When you turn off the ignition, the steering moves up and seat backwards for easy exit. Once you get back in and turn the ignition on, the steering+seat return to previous position. I think your car should have seat memory option for this to work?
Thread Starter
Senior Member
Joined: Oct 2013
Posts: 350
Likes: 2
none
Yes it does have memory seats. However the Command only has two options for the feature, OFF, and Steering Column and Seat. When I unlock the car it is in my seat seating arrangement stored in Memory button 1. When I start it up it does not do anything, but I remember it used to come forward. My steering wheel is all the way up and the seat is not all the way back while driving.
Junior Member
Joined: Mar 2012
Posts: 31
Likes: 2
w221 s350
Yes it does have memory seats. However the Command only has two options for the feature, OFF, and Steering Column and Seat. When I unlock the car it is in my seat seating arrangement stored in Memory button 1. When I start it up it does not do anything, but I remember it used to come forward. My steering wheel is all the way up and the seat is not all the way back while driving.
Also having just those two options "Off and Steering + Seat" is also unusual. From what I remember, you either get all three options or you get "Off and Steering" if you don't have memory option.
Thread Starter
Senior Member
Joined: Oct 2013
Posts: 350
Likes: 2
none
Now I lowered the column a bit and I recorded it on Memory 1. Now when I want to adjust the column manually, it does not move up or down when the car is off. I moved it down when it was off and then recorded it on Memory 1. But then when I tried to get it up it did not. I do hear a click from the button though.
