spacers on repro wheels
Thread Starter
MBWorld Fanatic!
Joined: Nov 2015
Posts: 1,699
Likes: 833
From: Newcastle, WA
2019 S63 4Matic+, 2018 E400 Cabrio, wardens car.
spacers on repro wheels
Hi Folks, I have 19" AMG repro wheels on my S550 4 Matic. I did not do offset wheels as I want to be able to rotate the tires. fronts look perfect but the rears could come out a bit still as they are still about 1" in from the edge of the fender. Would a spacer work for the rears. If so, any suggestions on a brand, also , I assume I would need longer lug nuts. They are 19" with a 35 degree offset now.
Member
Joined: Oct 2014
Posts: 170
Likes: 4
From: St. Louis, Missouri
2008 S63, 2012 E550, 2005 E55, 2005 SL55, 2013 SL63, 2020 AMG GT, 1994, 1998, 1999, 2001 SL500
Hi Folks, I have 19" AMG repro wheels on my S550 4 Matic. I did not do offset wheels as I want to be able to rotate the tires. fronts look perfect but the rears could come out a bit still as they are still about 1" in from the edge of the fender. Would a spacer work for the rears. If so, any suggestions on a brand, also , I assume I would need longer lug nuts. They are 19" with a 35 degree offset now.
Check H&R trak spacers. Application chart shows for which cars they work and most come with the appropriate lugs needed.
MBWorld Fanatic!
Joined: May 2008
Posts: 7,653
Likes: 560
2016 C300
On the 35mm, 12 mm spacers would put the rears flush with the fender. That puts you at net 24mm, which is what I run. 15mm would probably work as well, not much in 3mm. 10mm would be your best option.
