2009 Mercedes benz air matic suspension, malfunction
Thread Starter
Newbie
Joined: Oct 2017
Posts: 3
Likes: 0
mercedes benz s550 4matic
2009 Mercedes benz air matic suspension, malfunction
level control malfunction" shows up on dash. I got Fault code 5130. fault in component y36/2y3 (right rear suspension strut plunger valve) i replaced the compressor valve block but still i have the same code like before. Compressor worked.. when i left the car overnight later in the morning the car is lower than before
Any ideas what is wrong and how to fix? please i need some help i appreciate it thanks
Any ideas what is wrong and how to fix? please i need some help i appreciate it thanks
Last edited by eldabr; Oct 22, 2017 at 02:15 PM.
Newbie
Joined: Mar 2014
Posts: 4
Likes: 0
1999 E320 Sedan
Air leak
Have you checked the Strut itself? Could you hear the air escaping from the valve block? Did you check the level sensor arm at the wheel? They sometimes get frozen rusted then bend. I am having a similar problem with my suspension. How did you access the valve block to remove it?
Last edited by boman49; Oct 23, 2017 at 11:08 AM.
Thread Starter
Newbie
Joined: Oct 2017
Posts: 3
Likes: 0
mercedes benz s550 4matic
Have you checked the Strut itself? Could you hear the air escaping from the valve block? Did you check the level sensor arm at the wheel? They sometimes get frozen rusted then bend. I am having a similar problem with my suspension. How did you access the valve block to remove it?
